Hytera BP365 Handheld DMR and Analogue Radio UHF Ua 430-470 MHz

Hytera BP365 Advanced Handheld DMR and Analogue Radio UHF Ua 430-470 MHz

The Hytera BP365 is a versatile handheld radio that supports both digital and analogue communication modes, ensuring compatibility with your existing systems and terminals.

• Professional Noise Cancellation: Features a sophisticated noise cancellation algorithm for clear communication.
• Outstanding Sound Quality: Designed with a large acoustic cavity for superior sound.
• DMO Two-slot Communication: Utilizes Hytera Pseudo Trunk for efficient communication.
• Compact and Portable: Lightweight design with an extremely compact antenna for easy carrying.
• Extended Range: Enhanced RF solution for longer communication distances.
• Convenient USB Type-C Port: Charge, program, and update with a single port.

The BP365 offers an extended range and features 256 channels, allowing for flexible group communication.

Features

Extended Communication

Stay connected with a new RF solution featuring 3W TX power and RX sensitivity up to 0.18 μV.

Clear and Loud Audio

Professional noise reduction algorithm providing up to 20 dB noise reduction with a 3W speaker outputting up to 90dB audio.

Improved User Experience

Long-life keys, a 3.5 mm jack audio connector, and a USB Type-C port for easy programming and upgrading.

Fast Charging

Fully charges in 2.5 hours using USB Type-C connectivity, compatible with standard USB cables and power banks.

Easy to Carry

Lightweight design with a 4.5 cm ultra-stubby antenna for easy portability.

Simple and Stylish

Features a metal channel selector knob, metal mesh speaker, and dual-shot injection molding with a plating case.

Technical Specifications

General

• Frequency range: Ua 430-470 MHz
• Channel capacity: 256
• Zone capacity: 8
• Channels per zone: 16
• Channel spacing: Analogue - 12.5kHz/20kHz/25kHz, Digital - 12.5kHz
• Operating voltage: 3.8 V
• Battery: 2200 mAh Li-Polymer (built-in)
• Battery life: Analogue - 10 hours, Digital - 14 hours
• Frequency stability: ±0.5 ppm
• Antenna impedance: 50 Ω
• Dimensions: 118 x 55 x 25 mm
• Weight: 135 g (with antenna & battery)
• Display: 0.9 inch OLED

Receiver

• Sensitivity: Analogue - 0.18 μV (12dB SINAD), Digital - 0.18 μV / BER5%
• Adjacent channel selectivity: TIA-603 - 60 dB @12.5 kHz / 70 dB @20/25 kHz, ETSI - 60 dB @12.5 kHz / 70 dB @20/25 kHz
• Intermodulation: TIA-603 - 70 dB @12.5/20/25 kHz, ETSI - 65 dB @12.5/20/25 kHz
• Spurious response rejection: TIA-603 - 70 dB @12.5/20/25 kHz, ETSI - 70 dB @12.5/20/25 kHz
• Blocking: TIA-603 - 80 dB, ETSI - 84 dB
• Hum and noise: 40 dB @12.5 kHz, 43 dB @20 kHz, 45 dB @25 kHz
• Rated audio power output: 0.5W
• Rated audio distortion: <3%
• Audio response: +1 to -3dB
• Conducted spurious emission: <-57 dBm

Transmitter

• RF power output: 3W / 1W
• FM modulation: 11 K0F3E @12.5kHz, 14K0F3E @20kHz, 16K0F3E @25kHz
• 4FSK digital modulation: 12.5 kHz data only - 7K60FXD, 12.5 kHz data and voice - 7K60FXW
• Conducted/radiated emission: -36dBm @<1GHz, -30dBm @>1GHz
• Modulation limiting: ±2.5kHz @12.5kHz, ±4.0kHz @20kHz, ±5.0kHz @25kHz
• FM hum & noise: 40dB @12.5kHz, 43dB @20kHz, 45dB @25kHz
• Adjacent channel power: 60dB @12.5kHz, 70dB @20/25kHz
• Audio distortion: ≤3%
• Digital vocoder type: AMBE+2™
• Digital protocol: ETSI-TS102 361-1,-2,-3

Environmental

• Operating temperature: -20°C to +50°C
• Storage temperature: -40°C to +85°C
• ESD: IEC 61000-4-2 (level 3), ±4 kV (contact), ±8 kV (air)
• Ingress protection: none