Fujifilm X-H1 Body + Battery grip (SKU FU-XH1B+BG)

A versatile kit for photo and video, this FUJIFILM X-H1 Mirrorless Camera Body with Vertical Power Booster Grip pairs the professional X-H1 body with the VPB-XH1 grip and two extra NP-W126S batteries. The grip extends battery life, improves portrait handling, boosts burst performance in Boost mode, and extends 4K recording time to about 30 minutes. Two additional NP-W126S batteries are included.

X-H1 camera body — key features

• Durable magnesium-alloy construction with weather sealing and rugged ergonomics.

• 24.3MP APS-C X-Trans CMOS III sensor (no optical low-pass filter) for high sharpness, rich color, and reduced moiré.

• X-Processor Pro engine for fast startup, low-noise high-ISO performance, and responsive handling.

• In-body 5-axis image stabilization (IBIS), rated up to approximately 5.5 stops of compensation with compatible XF/XC lenses.

• Advanced hybrid autofocus system with 325 total AF points using both phase and contrast detection; improved AF-C, extended minimum aperture support to f/11.

• DCI 4K internal recording at 24 fps with a boosted 200 Mb/s bit rate; Full HD up to 120 fps for slow motion.

• Internal F-Log recording and ETERNA film simulation for flatter, cine-style footage and easier grading.

• Built-in 24-bit/48 kHz microphone and 3.5 mm input for external mics; built-in mic usable in a pinch.

• 0.5" electronic viewfinder, 3.69M-dot resolution, ~0.75x magnification, 100 fps refresh and 0.005 s display lag for smooth composition.

• Articulated 3.0" 1.04M-dot touchscreen LCD with three-way tilt for flexible shooting angles.

• 1.28" sub-LCD top display for quick status readout and fast changes in the field.

• Flicker reduction mode for shooting under problematic lighting such as fluorescent lights.

Image processing and performance

• ISO range expandable up to ISO 51200 for stills, supported by X-Processor Pro for low-noise performance.

• Fast performance: ~0.4 s startup, up to 14 fps with electronic shutter, up to 8 fps with mechanical shutter (depending on settings).

• Large dynamic range options, including a 400% dynamic range setting (approx. 12 stops) for enhanced shadow detail.

Body design and controls

• 25% thicker magnesium-alloy body shell for durability and improved weather resistance; operable down to about 14°F.

• Enlarged grip and redesigned back-button layout, AF-ON button, and leaf-spring shutter-release switch for better handling.

• Top-plate locking dials including shutter speed dial (mechanical range up to 1/8000 s plus bulb/time settings) and integrated ISO dial.

• Exposure compensation dial (±3 EV standard; can expand to ±5 EV with command dial), front/rear command dials with push functions, six assignable function buttons, and a dedicated focus lever for fast AF-point selection.

Video features

• DCI 4K (4096 × 2160) internal at up to 200 Mb/s for high-quality internal capture.

• Full HD slow motion up to 120 fps.

• HDMI output supports 8-bit 4:2:2 signal; F-Log internal recording for grading.

• Film Simulation effects and Grain Effect available for video as well as stills.

Optional Vertical Power Booster Grip (VPB-XH1)

• Holds up to two extra NP-W126S batteries in addition to the camera battery; extends normal-mode shot count to roughly 900 stills.

• Boost mode uses multiple batteries simultaneously to increase burst speed, reduce shutter lag, and minimize blackout.

• Extends continuous 4K recording to approximately 30 minutes.

• Vertical controls: shutter release, command dial, focus lever, AE-L, AF-ON, Q, and Fn buttons for comfortable portrait shooting.

• 3.5 mm headphone jack for on-board audio monitoring.

• Weather-sealed to match the camera body and operable down to about 14°F.

• Includes AC-9VS AC adapter for simultaneous charging of two batteries (approx. 2 hours full charge).

NP-W126S battery

• Improved thermal management and performance; compatible with cameras that accept NP-W126, though performance benefits are specific to newer bodies.

• Typical capacity and runtime vary by camera and settings.

Package contents (kit)

• X-H1 Mirrorless Camera (Body Only)

• VPB-XH1 Vertical Power Booster Grip

• EF-X8 Shoe-Mount Flash

• NP-W126S Li-Ion Battery Pack (x2 additional in kit)

• Compact AC/DC Charger for NP-W126/NP-W126S

• Body Cap for FUJIFILM X-Mount

• Shoulder Strap

• Strap Clip and Attaching Tool

• Protective Cover

• Clip Attachment Tool

• Limited 1-Year Warranty

Selected specifications (overview)

• Lens mount: Fujifilm X (APS-C, 1.5× crop)

• Sensor: 24.3 MP APS-C X-Trans CMOS III (approx. 6000 × 4000 max)

• Image stabilization: Sensor-shift, 5-axis (up to ~5.5 stops)

• Video: DCI 4K up to 24 fps (4096 × 2160) at up to 200 Mb/s; 3840 × 2160 UHD; Full HD up to 120 fps

• AF: Hybrid 325-point system (phase + contrast)

• EVF: 0.5" electronic, 3.69M dots, ~0.75x magnification, 100 fps refresh

• Rear screen: 3.0" tilting touchscreen, 1,040,000 dots

• Dual UHS-II SD card slots (fast media support)

• Shutter: Mechanical up to 1/8000 s; electronic up to 1/32000 s (modes vary)

• Max continuous shooting: up to 14 fps (electronic shutter) / up to 8 fps (mechanical) depending on settings and buffer

• Battery: NP-W126S (one included; kit includes two additional packs)

• Dimensions: approx. 139.8 × 97.3 × 85.5 mm (5.5 × 3.8 × 3.4")

• Weight: approx. 673 g / 23.74 oz (with battery and card)

• Operating temperature: 14 to 104°F (-10 to 40°C)

Notes and usage highlights

• The X-H1 is designed for hybrid shooters who need a durable body, strong stabilization, and pro-level video options.

• The VPB-XH1 grip is especially useful for sports, wildlife, portrait, and extended video work where burst speed, vertical controls, and longer recording are required.

• For best video and burst performance, use high-quality UHS-II or V90 media as recommended.