iOptron MiniPier (86906)

The MiniPier has a compact and sturdy design, measuring 15 cm in height with a diameter of 25 mm and a total weight of 0.5 kg (1.1 lb), making it easy to transport while providing solid support.

Compatible mounts that can be installed on the MiniPier include:
• HAZ31 and HAZ46 using a 3/8"-16 locking knob
• CEM26, HEM27, GEM28, and HAE29 using two M6 screws with 83 mm spacing and one center post
• CEM40, HAE43, HEM44, and GEM45 using two M6 screws with 103 mm spacing and one center post
• HEM15, HAE16, and HAE18 ultra-compact strain wave gear mounts using a 3/8"-16 locking knob
• SkyTracker Pro and SkyGuider Pro using a 3/8"-16 locking knob
• SkyHunter using a 3/8"-16 locking knob
• Cameras and other equipment with a 3/8"-16 mounting thread

The MiniPier is compatible with the following iOptron tripods and piers:
• Carbon fiber tripod models 8061 and 8061A
• CEM26 and GEM28 tripods using two M6 screws with 83 mm spacing
• CEM40, GEM45, and iEQ30 tripods using two M6 screws with 103 mm spacing
• CEM70, CEM60, and iEQ45 tripods using two M8 screws with 120 mm spacing
• CEM25 and ZEQ25 tripods using a 3/8"-16 thread adapter
• 3211 SmartEQ, SGP, STP, and SkyHunter tripods using a 3/8"-16 thread adapter
• Tri-pier using M6 or M8 screws
• Other tripods with a 3/8"-16 mounting screw or threaded holes matching the MiniPier mounting plate

The MiniPier is not compatible with the following piers:
• Tri-pier 360 and 360A
• Permanent piers

Technical specifications:
Type: Tripod accessory
Build type: Mount accessory
Height: 178 mm
Diameter: 102 mm