New products

Magus FL S-APO60 PlanF S-Apo 4х/10х/20х/40х/100х oil ∞/0.17 H60mm Objective Set (85154)
New
Magus FL S-APO60 PlanF S-Apo 4х/10х/20х/40х/100х oil ∞/0.17 H60mm Objective Set (85154)
187543.5 ₴
Tax included
The plan semi-apochromatic fluorescent objective is designed for both transmitted-light and fluorescence microscopy. The objective lenses are manufactured from fluorite, a highly transparent mineral that performs consistently across a wide wavelength range. Fluorite does not exhibit autofluorescence or birefringence and provides correction of the secondary spectrum. A high numerical aperture increases resolving power, producing images in the eyepieces and through a digital camera that are brighter, cleaner, and higher in contrast than those obtained with standard plan achromatic objectives.
Buy Details
Add to cart View details  
Magus Epi-FL04M LED Epi-Fluorescence Attachment, fluorescence filter cubes B/G/UV (85153)
New
Magus Epi-FL04M LED Epi-Fluorescence Attachment, fluorescence filter cubes B/G/UV (85153)
289286.42 ₴
Tax included
The epi-fluorescence attachment is designed to enable fluorescence microscopy. This technique relies on the ability of certain substances to emit light when excited by illumination at a specific wavelength. Some specimens naturally exhibit autofluorescence, while others require treatment with fluorochromes to produce a fluorescent signal. The attachment is installed in the optical path between the microscope head and the stand. Inside the unit is a four-position rotating turret that holds three broadband fluorescence filter sets for blue (B), green (G), and ultraviolet (UV) excitation.
Buy Details
Add to cart View details  
Magus SPH2 Phase Сontrast Device (85152)
New
Magus SPH2 Phase Сontrast Device (85152)
112525.93 ₴
Tax included
The MAGUS SPH2 phase contrast system includes a set of phase contrast sliders, a set of phase contrast objectives, and a centering telescope. This system is designed for the observation of transparent, low-contrast specimens that are difficult or impossible to see using brightfield illumination. Because staining procedures can damage or kill living cells, phase contrast offers a key advantage by allowing the study of living, unstained organisms in their natural state. The technique is widely used in medicine, ecology, pharmacology, agriculture, and related fields.
Buy Details
Add to cart View details  
Magus FM4 A10 Focus Mount (85150)
New
Magus FM4 A10 Focus Mount (85150)
9376.67 ₴
Tax included
The focusing mechanism is a structural component of the stereomicroscope designed to secure the microscope head to the stand. It enables precise vertical movement of the microscope head, allowing accurate focusing on the specimen. Focus adjustment is performed using coaxial knobs, which provide smooth and controlled operation during observation.
Buy Details
Add to cart View details  
Magus HCM360 Device for working with the Hoffman modulation contrast, with objective set (85123)
New
Magus HCM360 Device for working with the Hoffman modulation contrast, with objective set (85123)
95647 ₴
Tax included
The MAGUS HCM360 system is a complete set designed for Hoffman modulation contrast microscopy. It includes plan achromatic objectives, a dedicated condenser, and a slider. The objective modulator is aligned with the slider’s slit apertures using a centering telescope supplied with the microscope. Hoffman modulation contrast produces high-resolution, relief-like images of living specimens. It enhances visibility and contrast while preserving fine structural detail and avoiding diffraction halos. This makes it suitable for long working distances and high numerical apertures.
Buy Details
Add to cart View details  
Magus XY A10 Mechanical Stage for stereomicroscopes (85148)
New
Magus XY A10 Mechanical Stage for stereomicroscopes (85148)
13127.59 ₴
Tax included
The stage is mounted in the base of the stereomicroscope and is used for precise and smooth movement of the sample beneath the objective, as well as for documenting observations with a camera. Coaxial control knobs allow controlled movement of the specimen along the X axis (right and left) and the Y axis (forward and backward). The transparent glass surface of the stage enables work with both reflected and transmitted light. A vernier scale is provided for precise measurement along a single axis.
Buy Details
Add to cart View details  
Magus SPD A10 Polarizer/Analyzer Set (85146)
New
Magus SPD A10 Polarizer/Analyzer Set (85146)
9376.67 ₴
Tax included
This polarizer and analyzer set is designed to enable polarized light techniques. It includes a polarizer and an analyzer, and the intensity of transmitted light varies depending on their relative orientation. When the polarizer and analyzer are positioned perpendicular to each other, complete light extinction occurs. Polarized light is used to study anisotropic samples such as geological specimens, biological structures, and polymer materials.
Buy Details
Add to cart View details  
Magus BOP A10 Beamsplitter with one port (85143)
New
Magus BOP A10 Beamsplitter with one port (85143)
21848.28 ₴
Tax included
The CMO (Common Main Objective) system allows additional accessories to be incorporated into the optical path. A beamsplitter with a single port is mounted between the microscope head and the zoom objective and is used for installing a digital camera. A stereomicroscope built with a CMO design produces high-quality digital images without field distortion. This makes it well suited for photo and video recording, as well as for presentations and lectures that rely on visual demonstrations.
Buy Details
Add to cart View details  
Magus BTP A10 Beamsplitter with two ports (85142)
New
Magus BTP A10 Beamsplitter with two ports (85142)
42196.7 ₴
Tax included
The CMO (Common Main Objective) system allows additional accessories to be integrated into the optical path. A two-port beamsplitter is installed between the microscope head and the zoom objective, enabling the simultaneous use of two digital cameras. A stereomicroscope with a CMO design produces high-quality digital images without field distortion. This makes it an excellent choice for photo and video recording, as well as for presentations and lectures that rely on visual materials.
Buy Details
Add to cart View details  
Magus 2APO 2x Plan Apochromatic Main Objective (85137)
New
Magus 2APO 2x Plan Apochromatic Main Objective (85137)
84394.24 ₴
Tax included
To generate a three-dimensional image, a CMO stereomicroscope uses a common main objective positioned strictly perpendicular to the specimen plane. Light transmitted through or reflected from the specimen enters this objective and is divided into two parallel optical paths. The stereoscopic angle is 11 degrees. The separated light beams are then directed to the eyepieces or to a digital camera. Replacing the main objective changes the microscope’s magnification, field of view, and working distance.
Buy Details
Add to cart View details  
Magus 05A 0.5x Achromatic Main Objective (85136)
New
Magus 05A 0.5x Achromatic Main Objective (85136)
11720.84 ₴
Tax included
To create a three-dimensional image, an Abbe stereomicroscope uses a common main objective positioned precisely perpendicular to the specimen plane. Light transmitted through or reflected from the sample enters the main objective and is divided into two parallel optical paths. The stereoscopic angle is 11 degrees. The separated light beams are then directed to the eyepieces or to a digital camera. Replacing the main objective changes the microscope’s overall magnification, field of view, and working distance.
Buy Details
Add to cart View details  
Magus 03A 0.3x Achromatic Main Objective (85134)
New
Magus 03A 0.3x Achromatic Main Objective (85134)
13127.59 ₴
Tax included
To generate a three-dimensional image, a CMO stereomicroscope uses a common main objective positioned strictly perpendicular to the specimen plane. Light transmitted through or reflected from the sample enters this main objective and is then divided into two parallel optical paths. The stereoscopic angle is 11 degrees. The separated light beams are directed to the eyepieces or to a digital camera. Changing the main objective alters the microscope’s overall magnification, field of view, and working distance.
Buy Details
Add to cart View details  
Magus LED RL18T Ring Light (85129)
New
Magus LED RL18T Ring Light (85129)
11486.59 ₴
Tax included
This LED ring light with a matte diffuser is designed to provide bright, uniform, and shadow-free reflected illumination. It is mounted directly onto the CMO stereomicroscope objective, allowing the light to be delivered coaxially. This illumination method is particularly important when observing flat, glossy, or low-contrast samples. The matte diffuser effectively removes harsh shadows and significantly reduces glare, producing soft and evenly distributed light. The LEDs require no warm-up time, reaching the selected brightness instantly and maintaining a stable color temperature even during extended use.
Buy Details
Add to cart View details  
Magus CLI18T Cold Light with dual light guide (85128)
New
Magus CLI18T Cold Light with dual light guide (85128)
49182.86 ₴
Tax included
The MAGUS CLI18T illuminator is designed to illuminate samples with oblique light, making it possible to clearly visualize surface relief, scratches, cracks, and other defects through pronounced highlights and shadows. The design of the illuminator prevents sample heating and eliminates the risk of thermal damage. The light source is housed in a dedicated lamphouse. Light is directed to the specimen through a flexible dual light guide. The position of the light guide can be adjusted to set the desired illumination angle, allowing precise control over light and shadow formation for detailed examination. 
Buy Details
Add to cart View details  
Magus CEI A18 LED Episcopic Light with power supply and objective insert (85127)
New
Magus CEI A18 LED Episcopic Light with power supply and objective insert (85127)
93489.9 ₴
Tax included
Episcopic illumination provides bright, uniform, and shadow-free lighting of the field of view without causing heat damage to the specimen. It is specifically used for illuminating opaque objects in stereomicroscopy. The attachment is installed between the microscope head and the zoom objective. The light source is housed in a dedicated lamphouse, which is connected to the attachment by a flexible dual light guide. Light is delivered through the guide into the attachment and then directed to the sample through the objective. 
Buy Details
Add to cart View details  
Magus SCH4 Bio V360 Labware Holder Set (85126)
New
Magus SCH4 Bio V360 Labware Holder Set (85126)
17300.25 ₴
Tax included
This professional holder set is designed to securely fix labware of various shapes when working with an inverted microscope. It ensures stable positioning of dishes and provides convenience during sample replacement. The set includes four holders intended for culture bottles and similar labware. Each holder features two seating sizes, allowing compatibility with two standard labware dimensions. The holders are installed directly into the microscope stage according to the shape and size of the accessory being used.
Buy Details
Add to cart View details  
Magus 40PL60V Plan 40х/0.60 ∞/1.2 H60mm Objective (85122)
New
Magus 40PL60V Plan 40х/0.60 ∞/1.2 H60mm Objective (85122)
18003.41 ₴
Tax included
This objective is designed for brightfield microscopy. The MAGUS Bio V360 microscope kit includes phase objectives that incorporate a metal film ring etched onto the inner lens. This ring is required for phase-contrast observations, as it introduces a quarter-wavelength phase shift relative to the rest of the light and reduces light transmission. For this reason, objectives without phase plates are recommended for standard brightfield use. A 40×/0.60 objective provides a resolution limit of 0.45 µm.
Buy Details
Add to cart View details  
Magus 20PL60V Plan 20х/0.40 ∞/1.2 H60mm Objective (85121)
New
Magus 20PL60V Plan 20х/0.40 ∞/1.2 H60mm Objective (85121)
9376.67 ₴
Tax included
This objective is intended for brightfield microscopy. The MAGUS Bio V360 microscope kit includes phase objectives, which feature a metal film ring etched onto the inner lens. This ring is necessary for phase-contrast observations, as it introduces a quarter-wavelength phase shift relative to the remaining light and reduces light transmission. For this reason, objectives without phase plates are recommended for standard brightfield work. A 20×/0.40 objective provides a resolution limit of 0.69 µm.
Buy Details
Add to cart View details  
Magus 10PL60V Plan 10х/0.25 ∞/1.2 H60mm Objective (85120)
New
Magus 10PL60V Plan 10х/0.25 ∞/1.2 H60mm Objective (85120)
8204.17 ₴
Tax included
This objective is designed for brightfield microscopy. The MAGUS Bio V360 microscope kit includes phase objectives, which contain a metal film ring etched onto the inner lens. This ring is required for phase-contrast observations, as it introduces a quarter-wavelength phase shift relative to the remaining light and reduces overall light transmission. For this reason, objectives without phase plates are recommended for standard brightfield observations.
Buy Details
Add to cart View details  
Magus Epi-FL05 LED Epi-Fluorescence Attachment, fluorescence filter cubes B/G/UV/R (85158)
New
Magus Epi-FL05 LED Epi-Fluorescence Attachment, fluorescence filter cubes B/G/UV/R (85158)
243806.46 ₴
Tax included
The epi-fluorescence attachment enables the use of the fluorescence technique, which relies on the ability of certain substances to emit light when excited by light of a specific wavelength. Some specimens display natural autofluorescence, while others require treatment with fluorochromes to produce a fluorescent signal. The attachment is installed in the optical path between the microscope stand and the head. Inside the unit is a five-position rotating turret containing four fluorescence filters with different wavelength ranges: broad-band blue (B), green (G), ultraviolet (UV), and narrow-band red (R).
Buy Details
Add to cart View details  
Magus DIC290 Attachment Set (85108)
New
Magus DIC290 Attachment Set (85108)
205739.4 ₴
Tax included
The differential interference contrast (DIC) device is designed for studying transparent, low-contrast specimens that are difficult or impossible to observe using standard bright-field microscopy. This technique enhances image resolution and clarity through optical methods rather than chemical staining, while also providing additional structural information about the specimen. The DIC method creates a pseudo-relief effect, giving the image an apparent three-dimensional appearance. 
Buy Details
Add to cart View details  
Magus SPD3 Polarizer/Analyzer Set (85047)
New
Magus SPD3 Polarizer/Analyzer Set (85047)
43214.29 ₴
Tax included
This polarizer and analyzer set is designed to enable polarized light microscopy. The set includes a polarizer and an analyzer that work together to create polarized illumination for advanced specimen observation. The polarizer is mounted on the collector, while the analyzer is installed in the slot of the microscope stand above the revolving nosepiece. The polarizer is fully rotatable through 360 degrees, allowing precise control of the polarization angle. The intensity of transmitted light varies depending on the relative orientation of the polarizer and analyzer.
Buy Details
Add to cart View details  
Magus DF3 Darkfield Condenser NА 0.7-0.9 (85097)
New
Magus DF3 Darkfield Condenser NА 0.7-0.9 (85097)
12494.16 ₴
Tax included
This darkfield condenser is designed to enable darkfield microscopy, a technique used to observe unstained, translucent specimens that absorb very little light and are often invisible under conventional bright-field illumination. For proper operation, the numerical aperture of the condenser must be higher than that of the objective. With a numerical aperture range of 0.7 to 0.9, the condenser is suitable for use with dry objectives providing magnifications from 4× to 40× and numerical apertures below 0.9.
Buy Details
Add to cart View details  
Magus DF4 Darkfield Condenser NА 1.3-1.26 oil (85096)
New
Magus DF4 Darkfield Condenser NА 1.3-1.26 oil (85096)
15030.82 ₴
Tax included
This darkfield condenser is designed to enable darkfield microscopy, a technique used to visualize unstained, translucent specimens that absorb little light and are often invisible under standard bright-field illumination. To use the darkfield condenser correctly, it must be paired with an objective whose numerical aperture is lower than that of the condenser. With a numerical aperture range of 1.26 to 1.30, the condenser is suitable for use with 20× and higher-magnification objectives.
Buy Details
Add to cart View details