ITAS Series - Advanced Iridium Transceiver Antenna System

The ITAS Series - Advanced Iridium Transceiver Antenna System is the ultimate solution for all your communication needs, offering a seamless plug-and-play experience. Designed to simplify satellite communication, it integrates key components into one compact system.

Key Features

• Integrated with Iridium 9602 SBD transceiver and antenna
• Comes with a serial data interface and power regulation circuit
• Uses M12/8 connector to interface with customer hardware
• Supports Iridium Short Burst Data (SBD) for both MO-SBD and MT-SBD messages
• Eliminates RF cable loss for enhanced network performance
• Certified for operation in harsh environments

Benefits

The ITAS system is designed for easy installation and integration, making it ideal for developers with tight time-to-market pressures. This reduces development time and costs significantly, making it perfect for M2M applications such as remote asset tracking and monitoring solutions.

Power Options

• Standard version: 8-32VDC power supply
• Optional version: Tailored for a 5V regulated power supply

Installation Options

• Screw mount with a short cable pigtail and M12 8pin connector
• Screw mount with an integrated M12 8pin interface

How it Works

The ITAS functions as a smart antenna with a non-provisioned 9602 SBD Modem. It connects to your system using its serial interface with an M12/8pin connector. The communication and power supply are managed through this connection. Communication with the ITAS utilizes standard AT-commands via the RS232 interface. The device requires provisioning by authorized Iridium partners and does not need a SIM-card or any unit opening.

Technical Specifications

Communications – IRIDIUM

• Transmit Frequency: 1616 – 1626.5 MHz
• Transmit Power: 1.6W
• Max Message Size: Tx 340 Bytes, Rx 270 Bytes
• Latency: 20 seconds (typical)

Dimensions / Mechanical

• Length/Width/Height: 124.3mm/80.3mm/31mm (35.2mm for magnet mount)
• Weight: Approximately 540g
• Mounting: Through hole (hole diameter 15mm); Magnetic mount option available

Power

• External Power Source: 8—32 VDC (5VDC optional)
• Power Consumption: 1 Amp max transmit, 65mA Standby
• Transient Protection: SAE J1113/11/12
• Reverse Voltage Protection: 24V tested

Data Interfaces

• Type: 1 Serial RS-232C
• Default Baud Rate: 19200
• Interface Protocol: AT Command Set
• Flow Control: Software
• Connector: Direct connect or pigtail M12-8M male (3-wire RS232C)
• Extension Cables: Customized upon request

Environmental Specifications

• Operating Temperature: -40°C to +85°C
• Storage Temperature: -40°C to +85°C
• Low Pressure Storage: Up to 16hrs at 40,000 ft.
• Humidity: SAE J1455
• Cyclic Humidity: 4 days @ -40 to 85°C
• Thermal Shock: 36 cycles, -40 to 85°C
• Shock: SAE J1455
• Vibration: SAE J1455
• Protection Class: IP66