Baader Guide scope rings BP IV 175-265mm (85667)
New
Baader Guide scope rings BP IV 175-265mm (85667)
2665.77 lei
Tax included
If you want to install a guide telescope in parallel to your main telescope, guide rings are the simplest and most cost-effective solution. The Guide Rings PLUS 115mm provide high build quality and all the essential features for this purpose, allowing you to mount guide telescopes such as 80mm diameter refractors. The guide scope is held securely in place, will not slip, and is protected from scratches. There are four additional milled flat surfaces with photo thread holes on the outer edge of the rings, making it easy to attach extra accessories or connect multiple rings together.
Buy Details
Add to cart View details  
Baader Tripod Double tube photo stand "astro &amp, Nature" - with carrying bag (10175)
New
Baader Tripod Double tube photo stand "astro &amp, Nature" - with carrying bag (10175)
963.76 lei
Tax included
This tripod is specially designed for astronomical observation, offering a highly torsion-resistant structure and a central column that can be extended by 35 cm. It is ideal for standing observation with binoculars or spotting scopes, and features a maximum height of 189 cm. The tripod comes with a fluid pan-tilt head equipped with handles for stable, two-handed positioning of binoculars. The twin strut legs have telescopic sections for added stability. The pan-tilt head is removable, allowing the tripod to be used as a solid tangential mount with a 1/4" photo thread.
Buy Details
Add to cart View details  
Baader Heavy-duty dual mounting plate up to 150kg (85767)
New
Baader Heavy-duty dual mounting plate up to 150kg (85767)
5126.49 lei
Tax included
This solid 8-inch double mounting plate has a length of 750 mm and is specifically designed for the parallel installation of two large telescopes, supporting a load capacity of up to 150 kg. It is ideal for main instruments ranging from 20 to 24 inches (such as the PlaneWave DeltaRho 500) used together with an additional telescope. The extended length of the plate provides flexible balancing and ample space for extra accessories.
Buy Details
Add to cart View details  
Baader OMS-Nano Remote Switch for 10Micron Mounts (85640)
New
Baader OMS-Nano Remote Switch for 10Micron Mounts (85640)
1148.3 lei
Tax included
This external OMS-Nano (Observation Management System) switch module allows any 10Micron GM or AZ mount to be switched on and off remotely. The module connects to the same LAN network as the mount. Once installed, it can be accessed through its assigned IP address using any web browser. The OMS-Nano comes preconfigured for direct use with 10Micron mounts, and all necessary cables are included.
Buy Details
Add to cart View details  
Berlebach Tripod Planet Celestron NexStar Evolution (85554)
New
Berlebach Tripod Planet Celestron NexStar Evolution (85554)
3703.38 lei
Tax included
This stable wooden tripod features large cross-sections and innovative clamping elements, providing a high load capacity and outstanding stability with excellent shock absorption. The new, extremely flat tripod head with a 105 mm wide leg connection delivers maximum torsional rigidity. The modified wood profile increases the load capacity to 120 kilograms compared to the previous version.
Buy Details
Add to cart View details  
Berlebach Tripod Planet Skywatcher CQ350 (85671)
New
Berlebach Tripod Planet Skywatcher CQ350 (85671)
3457.32 lei
Tax included
This stable wooden tripod features large cross-sections and innovative clamping elements, delivering a high load capacity and excellent stability with outstanding shock absorption. The new, extremely flat tripod head with a 105 mm wide tripod leg connection provides maximum torsional rigidity. The updated wood profile increases the load capacity to 120 kilograms compared to the previous version. Double clamp collars on the tripod leg extension are available upon request for an additional charge.
Buy Details
Add to cart View details  
Berlebach Tripod UNI 18 iOptron CEM26/GEM28/HAE29/HEM27 (85992)
New
Berlebach Tripod UNI 18 iOptron CEM26/GEM28/HAE29/HEM27 (85992)
2686.27 lei
Tax included
The Astro tripods of the UNI series are known for their excellent price-performance ratio. As with all wooden tripods, they provide very effective damping of high-frequency vibrations, which are often transmitted by steel or aluminum tripods. This quality makes wooden tripods especially attractive for demanding astronomers and astrophotographers. The tripod legs have an infinitely adjustable spread angle. The attachable shelf, measuring 37 cm, allows a spread angle of approximately 23 degrees.
Buy Details
Add to cart View details  
Berlebach Tripod Sky 10Micron GM 2000 HPS (85759)
New
Berlebach Tripod Sky 10Micron GM 2000 HPS (85759)
10901.01 lei
Tax included
This tripod is a world first from a company with the longest tradition in tripod manufacturing. It is specially designed for highly demanding and ambitious astronomers. The Berlebach SKY tripod combines the excellent qualities of wood with the advanced benefits of modern carbon materials. The ultra-flat tripod head features 105 mm wide leg joints for maximum torsional stiffness. The carbon-fibre feet are produced with a new manufacturing process, contributing to the tripod’s high load capacity and light weight.
Buy Details
Add to cart View details  
Berlebach Wooden tripod Report 422 3/8" (85672)
New
Berlebach Wooden tripod Report 422 3/8" (85672)
1607.65 lei
Tax included
The Modular Report Tripod System features a lightweight magnesium mounting head that serves as the base for ten different inserts. The module insert can be changed at any time with the included special wrench. The conical fixation system provides a secure, clearance-free connection between components. With the new stop system, the tripod legs can be set at angles of approximately 20°, 40°, 60°, 80°, and 100° using a wing catch. This design ensures that the specified load capacity of the tripod is maintained even at maximum leg inclination.
Buy Details
Add to cart View details  
Berlebach Wooden tripod Report 723 3/8" (85760)
New
Berlebach Wooden tripod Report 723 3/8" (85760)
1250.87 lei
Tax included
The Modular Report Tripod System features a lightweight magnesium mounting head that serves as the base for ten different inserts. The module insert can be changed at any time using the special wrench included with the changing module. The conical fixation system ensures a secure, clearance-free connection of the components. The new stop system allows the tripod legs to be set at angles of approximately 20°, 40°, 60°, 80°, and 100° using a wing catch. This design ensures the tripod can support its specified load even at the maximum leg inclination.
Buy Details
Add to cart View details  
Berlebach Wooden tripod Report 823 3/8" (85811)
New
Berlebach Wooden tripod Report 823 3/8" (85811)
1345.18 lei
Tax included
The Modular Report Tripod System features a lightweight magnesium mounting head that serves as the base for ten different inserts. The module insert can be changed at any time using the special wrench provided. The conical fixation system ensures a secure, clearance-free connection between components. With the new stop system, the tripod legs can be set at angles of approximately 20°, 40°, 60°, 80°, and 100° using a wing catch. This design ensures that the tripod maintains its specified load capacity even at maximum leg spread.
Buy Details
Add to cart View details  
Sky-Watcher Equatorial wedge for Fusion 120i (SW-4246)
New
Sky-Watcher Equatorial wedge for Fusion 120i (SW-4246)
766.53 lei
Tax included
The Sky-Watcher Equatorial Wedge for the Fusion 120i is a robust accessory that converts the alt-azimuth mount of the telescope into an equatorial mount, making it possible to perform long-exposure astrophotography. By setting the wedge angle to match the geographical latitude of your observing location, you can track celestial objects along a single axis (right ascension), which greatly simplifies taking long-exposure images.
Buy Details
Add to cart View details  
Berlebach Wooden tripod Report Astro 412 3/8" (58307)
New
Berlebach Wooden tripod Report Astro 412 3/8" (58307)
1898.85 lei
Tax included
Stability and vibration damping are crucial requirements for any tripod. The Berlebach REPORT tripod system is designed to meet the highest standards, delivering quality and reliability for demanding users in observation, photography, video, astronomy, film, and geodesy applications. Berlebach tripods are known for their high-quality materials, excellent craftsmanship, and award-winning design. The Report 412 tripod comes with module insert 1, which is suitable for mounting heavy instruments. These instruments are placed on top and secured from below using a star knob.
Buy Details
Add to cart View details  
Berlebach 3-way-panheads 3D-Super 3/8 (85555)
New
Berlebach 3-way-panheads 3D-Super 3/8 (85555)
1431.32 lei
Tax included
High-precision tripod head for three-dimensional pan and tilt operation. Swivel arm can be controlled from the front or rear, suitable for both right- and left-handed users. Each adjustment axis—horizontal, vertical, diagonal—can be released and locked individually. Camera support plate: 105 x 80 mm. Camera mount thread: 1/4", or 3/8" optional. Base thread: 3/8". Load capacity: 12 kg
Buy Details
Add to cart View details  
Berlebach 3-way-panheads Pegasus (85560)
New
Berlebach 3-way-panheads Pegasus (85560)
2440.22 lei
Tax included
This ball head features an innovative design that enables smooth sideways movements while maintaining excellent stability and ease of use. The unique MotionControl technology prevents unwanted sideways tilting. The design offers high stability for static shots and complete flexibility for dynamic photography. It supports a wide range of applications, from wide-angle to fast super telephoto lenses, and is suitable for both portrait and panorama photography.
Buy Details
Add to cart View details  
Berlebach 2-way-panheads Albatros (85559)
New
Berlebach 2-way-panheads Albatros (85559)
2235.13 lei
Tax included
This ball head features an innovative design that allows for smooth sideways movements with excellent stability and user-friendly operation. MotionControl technology prevents unwanted sideways tilting. The design ensures high stability for static shots and maximum flexibility for dynamic photography. It is suitable for a wide range of uses, from wide-angle to fast super telephoto lenses, as well as for portrait and panorama photography.
Buy Details
Add to cart View details  
Bresser Camera HD Moon Planetary Guider 1.25" Color (77298)
New
Bresser Camera HD Moon Planetary Guider 1.25" Color (77298)
529.04 lei
Tax included
This affordable entry-level astrophotography camera is perfect for capturing the Moon, planets, or bright star clusters. Equipped with the advanced SONY IMX225 CMOS color sensor, this camera delivers excellent image quality even when used with basic telescope equipment. It is also suitable for use as an autoguider. The new Sony chip generation ensures an exceptionally low noise level, resulting in highly brilliant images without the need for cooling.
Buy Details
Add to cart View details  
Bushnell Expandable Arbor Kit Case & Arbors.17 - .45 calibre, box (73781)
New
Bushnell Expandable Arbor Kit Case & Arbors.17 - .45 calibre, box (73781)
720.86 lei
Tax included
The Bushnell Expandable Arbor Kit is a practical and versatile tool designed for firearms enthusiasts and professionals. This kit provides a convenient way to ensure precise alignment and stability when working with firearms ranging from .17 to .45 calibre. The set includes a durable storage case and a range of expandable arbors to fit various calibres, making it suitable for a wide variety of cleaning, maintenance, and gunsmithing tasks.
Details
View details  
Celestron Camera Skyris Aptina 132 Color (45278)
New
Celestron Camera Skyris Aptina 132 Color (45278)
2564.43 lei
Tax included
The Skyris Aptina camera is a modern, versatile solution for astrophotography, combining a state-of-the-art Aptina sensor with high-speed USB 3.0 connectivity. This design allows extremely rapid data transfer to your computer, supporting ultra-fast readout and high frame rates. With USB 3.0 and the ability to use subframing, you can achieve up to 200 frames per second for planetary imaging, or use the full 1.2 MP sensor at 60 frames per second—ideal for imaging the Sun and Moon.
Buy Details
Add to cart View details  
Celestron Mounting plate for CGE (21904)
New
Celestron Mounting plate for CGE (21904)
451.54 lei
Tax included
The CGE universal mounting plate provides a versatile solution for attaching various accessories to your CGEM or CGE Pro equatorial mount. Once installed on the mounting platform, it enables secure attachment of telescope rings, spotting scopes, cameras, and other compatible equipment. This plate adds flexibility and convenience for users who want to expand or customize their observational setup.
Buy Details
Add to cart View details