Askar Flattener 1.0x 160 f/7 (87467)
Askar Flattener 1.0x 160 f/7 (87467)
340.12 £
Tax included
A field flattener is an optical lens designed to correct the slight curvature of the image field produced by a telescope’s primary optics. This inherent curvature causes stars near the edges of the field of view to appear less sharp. By compensating for this effect, the flattener ensures that stars remain sharp and well-defined across the entire image, from the center to the outer edges of the frame.
Details
View details  
Askar Reducer 0.8x 120APO (88179)
Askar Reducer 0.8x 120APO (88179)
196.82 £
Tax included
A focal reducer shortens the effective focal length of a telescope, making the optical system faster for astrophotography. This results in a brighter image and a wider field of view, allowing larger areas of the sky to be captured in a single exposure.
Details
View details  
Astronomik Filters H-alpha 12nm MaxFR XT Clip Nikon Z XL (88411)
Astronomik Filters H-alpha 12nm MaxFR XT Clip Nikon Z XL (88411)
355.66 £
Tax included
Astronomik XT filters for wide-angle optics are designed to deliver sharp, well-defined stars right into the corners of the image, even with extreme wide-angle lenses. With standard Astronomik filters, image quality at very short focal lengths can be limited. Although these filters use a glass substrate only one millimetre thick, certain wide-angle lenses can still introduce aberrations, causing stars near the edges of the frame to stretch into short lines.
Buy Details
Add to cart View details  
Baader Filters D-ERF energy protection filter 290 mm (87870)
Baader Filters D-ERF energy protection filter 290 mm (87870)
4005.49 £
Tax included
Plano-parallel round optical discs with both surfaces precision-polished to lambda/10 accuracy ensure excellent optical quality. An advanced infrared anti-reflection coating, based on a multi-layer dielectric interference system, prevents excessive heat from entering the telescope’s optical tube assembly. The plano-parallel D-ERF (Energy Rejection Filter) effectively blocks infrared radiation, even during extended observing sessions.
Buy Details
Add to cart View details  
DayStar Solar filters QUARK Gemini Combo H-Alpha (87882)
DayStar Solar filters QUARK Gemini Combo H-Alpha (87882)
2175.39 £
Tax included
The DayStar Quark Gemini combines both Prominence and Chromosphere bandpass filters in a single unit, allowing instant switching between the two views using a simple slide mechanism. Observers can now enjoy the strengths of both bandpasses in one easy-to-use tool, with no need to change equipment or refocus. By sliding the control arm side to side—much like during an eye exam—you can transition from the broader bandpass view, which highlights large, dramatic solar prominences, to the narrower bandpass view, delivering high-contrast detail of chromospheric features.
Buy Details
Add to cart View details  
Evident Olympus Software CellSens Dimension Version 4.4 CS-DI-V4.4-EL - Licence (N6457500, 88257)
Evident Olympus Software CellSens Dimension Version 4.4 CS-DI-V4.4-EL - Licence (N6457500, 88257)
6332.87 £
Tax included
cellSens imaging software is designed for intuitive operation and a smooth, efficient workflow. It supports microscopy users with powerful tools that simplify image acquisition, processing, and analysis, helping to streamline everyday laboratory tasks as well as advanced research applications. cellSens Dimension is the most versatile and comprehensive solution within the Olympus cellSens software family. It combines automated image acquisition with advanced analysis functions, making it suitable for a wide range of microscopy applications.
Buy Details
Add to cart View details  
Evident Olympus Software CellSens Standard Version 4.4 CS-ST-V4.4 - Licence (N6457400, 88256)
Evident Olympus Software CellSens Standard Version 4.4 CS-ST-V4.4 - Licence (N6457400, 88256)
2335.89 £
Tax included
cellSens imaging software is designed for intuitive operation and a smooth, efficient workflow. It supports a wide range of microscopy tasks by combining user-friendly controls with advanced image acquisition, processing, and analysis capabilities. cellSens Standard is the successor to the cellSens Entry Package and expands functionality beyond single-image capture. It supports advanced image acquisition methods such as time-lapse imaging and enables control of motorized and coded microscope components.
Buy Details
Add to cart View details  
Evident Olympus Evident Software PRECiV Core, Pro or Desktop Extension PV-S-GS-EL Solution Licence (N6417700, 88272)
Evident Olympus Evident Software PRECiV Core, Pro or Desktop Extension PV-S-GS-EL Solution Licence (N6417700, 88272)
3772.03 £
Tax included
This solution is an optional add-on for PRECiV Core, Pro, or Desktop software and is designed for grain size analysis. It enables manual measurement of ferritic or austenitic grain size in steel and supports automatic determination of grain size distribution on etched microstructures. The add-on is suitable for metallographic analysis in research, quality control, and industrial applications where standardized grain size evaluation is required.
Buy Details
Add to cart View details  
Evident Olympus Evident Software PRECiV Core, Pro or Desktop Extension PV-S-NMI-EL Solution Licence (N6417800, 88273)
Evident Olympus Evident Software PRECiV Core, Pro or Desktop Extension PV-S-NMI-EL Solution Licence (N6417800, 88273)
3772.03 £
Tax included
This solution is an optional add-on for PRECiV Core, Pro, or Desktop software and is designed for the analysis of non-metallic inclusions. It enables automatic detection of inclusions based on color, shape, and size, along with automatic classification of oxides, sulphides, silicates, and aluminates. Detected inclusions are displayed live on the screen together with the corresponding evaluation results, allowing efficient and standardized analysis.
Buy Details
Add to cart View details  
Evident Olympus SZX2-CPO polarisation insert (N5733500, 69490)
Evident Olympus SZX2-CPO polarisation insert (N5733500, 69490)
344.33 £
Tax included
This polarization plate module is designed for use with the SZX2-ILLTQ/S illumination base and supports polarization contrast techniques in stereo microscopy. It can be combined with the SZX2-AN analyzer and the KL-RA-SZX-2 ring light adapter to enable polarized light observation, making it suitable for material analysis, quality control, and educational applications.
Details
View details  
Geoptik Tripod levelling system for EQ6 (88282)
Geoptik Tripod levelling system for EQ6 (88282)
261.27 £
Tax included
This three-piece kit is designed to make leveling your EQ6 tripod fast, precise, and highly convenient. It installs between each tripod leg and the tripod base, forming a solid, integrated unit that becomes part of the tripod structure itself. Adjustment is simple and intuitive. You raise or lower the desired leg by turning it, then secure the position using the reference locking ring.
Buy Details
Add to cart View details  
Hotech 2" SCA field flattener (22937)
Hotech 2" SCA field flattener (22937)
211.09 £
Tax included
Refractor telescopes often produce optical errors toward the edge of the image field. This leads to field curvature, where stars near the edges appear blurred, distorted, or out of focus. Such curvature reduces image quality and is especially undesirable in astrophotography, where visual aesthetics and pinpoint stars matter. The Hotech Field Flattener offers a simple and effective solution to this common issue. Achieving sharp stars right to the corners of the image is possible with the Hotech Field Flattener—and it is remarkably easy to use.
Details
View details  
Hotech HyperStar Laser Collimator 14" (64686)
Hotech HyperStar Laser Collimator 14" (64686)
524.28 £
Tax included
Achieving precise star collimation normally requires ideal conditions: clear skies, no wind, stable temperatures, minimal light pollution, a well-aligned tracking mount, thermal equilibrium of the optical tube, and a suitably bright reference star. In reality, these factors are rarely all present at the same time. As a result, traditional star collimation often becomes a frustrating trial-and-error process, moving back and forth between the front and rear of the telescope, adjusting screws while trying to judge concentricity through a high-magnification eyepiece as the defocused star image constantly shifts.
Details
View details  
Hotech HyperStar Laser Collimator 9.25" / 11" (64685)
Hotech HyperStar Laser Collimator 9.25" / 11" (64685)
524.28 £
Tax included
Achieving precise star collimation typically demands ideal observing conditions: clear skies, calm air, stable temperatures, minimal light pollution, a well-aligned tracking mount, thermal equilibrium of the optical tube, and a suitably bright reference star. In practice, many of these factors are beyond the observer’s control. As a result, traditional star collimation often turns into a frustrating guessing game—moving between the front and back of the telescope, adjusting screws while peering through a high-magnification eyepiece at an unstable, defocused star image. The process can be time-consuming and unreliable.
Details
View details  
Hubble Optics Wireless Handpad (71116)
Hubble Optics Wireless Handpad (71116)
508.7 £
Tax included
The Hubble Optics handpad features a built-in, astronomer-adjustable LED flashlight and a glow-in-the-dark keypad, making it easy to operate even in complete darkness without compromising night vision. A keyboard lock function is included, allowing only the arrow keys to remain active. This is especially useful when handing the controller to the general public, for example during outreach events, as users can safely move the telescope to explore objects like the Moon without the risk of changing critical settings.
Details
View details  
Hubble Optics Wheelbarrow for UL 24 Dobsonian (53726)
Hubble Optics Wheelbarrow for UL 24 Dobsonian (53726)
356.44 £
Tax included
This set includes two sturdy steel handles, each equipped with an air-filled tire with a diameter of 15 cm. The handles are mounted directly onto the rocker box of a Dobsonian telescope, allowing the entire instrument to be moved easily even when fully assembled. The telescope can be repositioned without removing the base, making setup and relocation quick and convenient during observing sessions.
Details
View details  
Hubble Optics Primary mirror 355/1778 Pyrex Enhanced Coating (56560)
Hubble Optics Primary mirror 355/1778 Pyrex Enhanced Coating (56560)
2543.53 £
Tax included
The Hubble Optics lightweight sandwich mirror is a cost-effective and high-performance alternative to traditional solid mirrors and other lightweight designs on the market. Inspired by the construction principles of the Hubble Space Telescope, these mirrors combine advanced thermal behavior with excellent structural stability, delivering superior real-world optical performance. Telescope mirrors are manufactured under tightly controlled temperature and humidity conditions and are precisely measured only after reaching full thermal equilibrium.
Details
View details  
Hubble Optics Primary mirror 406/2032 Pyrex Enhanced Coating (56561)
Hubble Optics Primary mirror 406/2032 Pyrex Enhanced Coating (56561)
2906.89 £
Tax included
The Hubble Optics lightweight sandwich mirror is a cost-effective and high-performance alternative to conventional solid mirrors and other lightweight designs on the market. Its construction is inspired by the design principles used for the Hubble Space Telescope, combining advanced thermal behavior with excellent structural stability to deliver superior real-world optical performance. Telescope mirrors are manufactured under strictly controlled temperature and humidity conditions and are precisely measured only after reaching thermal equilibrium.
Details
View details  
Hubble Optics Primary mirror 457/2057 Pyrex Enhanced Coating (56562)
Hubble Optics Primary mirror 457/2057 Pyrex Enhanced Coating (56562)
4360.33 £
Tax included
The Hubble Optics lightweight sandwich mirror is a cost-effective and high-performance alternative to conventional solid mirrors and other lightweight designs available on the market. Its construction follows principles similar to those used in the Hubble Space Telescope, combining advanced thermal behavior with excellent structural stability to achieve superior real-world optical performance. Telescope mirrors are manufactured under tightly controlled temperature and humidity conditions and are precisely measured only after reaching thermal equilibrium.
Details
View details  
Hubble Optics Primary mirror 508/1880 Pyrex Enhanced Coating (56558)
Hubble Optics Primary mirror 508/1880 Pyrex Enhanced Coating (56558)
6332.87 £
Tax included
The Hubble Optics lightweight sandwich mirror is a cost-effective and high-performance alternative to conventional solid mirrors and other lightweight designs available on the market. Its construction follows principles similar to those used in the Hubble Space Telescope, combining advanced thermal behavior with excellent structural stability to deliver superior optical performance in real observing conditions. Telescope mirrors are manufactured in tightly controlled temperature and humidity environments and are precisely measured only after reaching thermal equilibrium.
Details
View details  
Hubble Optics Primary mirror 508/2134 Pyrex Enhanced Coating (56563)
Hubble Optics Primary mirror 508/2134 Pyrex Enhanced Coating (56563)
4948.63 £
Tax included
The Hubble Optics lightweight sandwich mirror is a cost-effective and high-performance alternative to conventional solid mirrors and other lightweight designs on the market. Its construction follows principles similar to those used in the Hubble Space Telescope, combining advanced thermal behavior with excellent structural stability to deliver superior optical performance under real observing conditions. Telescope mirrors are manufactured in tightly controlled temperature and humidity environments and are precisely measured only after reaching thermal equilibrium.
Details
View details  
Hubble Optics Primary mirror 610/2560 Pyrex Enhanced Coating (56564)
Hubble Optics Primary mirror 610/2560 Pyrex Enhanced Coating (56564)
9170.54 £
Tax included
The Hubble Optics lightweight sandwich mirror is a cost-effective and high-performance alternative to conventional solid mirrors and other lightweight designs available on the market. Its construction is inspired by the design principles of the Hubble Space Telescope, combining advanced thermal behavior with excellent structural stability to deliver superior optical performance in real observing conditions. Telescope mirrors are manufactured in tightly controlled temperature and humidity environments and are precisely measured only after reaching thermal equilibrium.
Details
View details