New products

DJI Matrice 400 2510F Propeller (CP.EN.00000675.01)
New
DJI Matrice 400 2510F Propeller (CP.EN.00000675.01)
1106.75 Kč
Tax included
The DJI Matrice 400 2510F Propellers are high-thrust, factory-matched rotors specifically designed for the Matrice 400 platform. Each pair features 25 × 10-inch carbon-fiber composite blades that fold for easy transport but lock rigidly during flight. These propellers support the drone’s 59-minute maximum endurance and 6 kg payload capacity while maintaining IP55-level protection against dust and water.
Buy Details
Add to cart View details  
DJI Matrice 400 Gimbal Damper (CP.EN.00000676.01)
New
DJI Matrice 400 Gimbal Damper (CP.EN.00000676.01)
307.42 Kč
Tax included
This is a factory replacement vibration-isolation set designed for the single and dual downward gimbal mounts on the DJI Matrice 400 aircraft. The upgraded silicone formula allows each damper to support optics weighing up to 1.4 kg, providing effective low-frequency damping and increased durability for high-load and extended missions. Each damper is filled with silicone, so care should be taken during installation to avoid punctures or leaks when replacing dampers on the gimbal cradle.
Buy Details
Add to cart View details  
DJI E-Port V2 Coaxial Cable Kit (CP.EN.00000645.01)
New
DJI E-Port V2 Coaxial Cable Kit (CP.EN.00000645.01)
4673.06 Kč
Tax included
This kit provides a reliable connection between PSDK payloads and your drone platform. Each coaxial cable contains a DJI SDK-certified chip, ensuring smooth and compatible data transmission for custom payload development. The kit is designed with clear pin mapping, making it easy for developers to integrate and scale their solutions. With 10 cables included, it is suitable for multiple projects or testing environments.
Buy Details
Add to cart View details  
DJI E-Port V2 Development Kit (CP.EN.00000644.01)
New
DJI E-Port V2 Development Kit (CP.EN.00000644.01)
1475.74 Kč
Tax included
This development kit converts the aircraft’s E-Port V2 into several standard hardware interfaces and includes an onboard microcontroller unit (MCU), making it simple for developers to connect devices and work on SDK development and debugging tasks. When integrating the adapter board into a finished payload, it is recommended to include a heat sink and a metal enclosure. If you notice sparks, smoke, a burning smell, or any unusual behavior after powering on, immediately turn off the power.
Buy Details
Add to cart View details  
DJI Matrice 400 BS100 Intelligent Battery Station (CP.EN.00000683.02)
New
DJI Matrice 400 BS100 Intelligent Battery Station (CP.EN.00000683.02)
30130.01 Kč
Tax included
The BS100 Intelligent Battery Station is designed to provide advanced battery management for the DJI Matrice 400. It delivers smart charging, adaptive modes, and automatic optimization for TB100 batteries, helping professionals maintain their drone power supply efficiently. With its advanced technology, the BS100 increases drone uptime and extends battery life, making it an essential tool for demanding fieldwork.
Buy Details
Add to cart View details  
DJI Matrice 400 TB100C Tethered Battery (CB.202506113128)
New
DJI Matrice 400 TB100C Tethered Battery (CB.202506113128)
41505.78 Kč
Tax included
This tethered battery enables the DJI Matrice 400 to operate as a long-duration aerial lighting or communication base station when connected by cable. It is compatible with third-party tethered lighting and communication devices, allowing for extended missions that require continuous power. The battery features reserved ports to support third-party development of automated recharging stations.
Buy Details
Add to cart View details  
DJI Matrice 400 Third Gimbal Connector (CP.EN.00000672.01)
New
DJI Matrice 400 Third Gimbal Connector (CP.EN.00000672.01)
3258.89 Kč
Tax included
The Third Gimbal Connector for the DJI Matrice 400 allows users to attach an additional gimbal or custom payload, significantly increasing the drone’s versatility for advanced missions. It is especially useful for setups that require two or three sensors, such as RGB plus thermal, LiDAR and visual, or multispectral with zoom. This connector provides reliable power, control, and data transfer between the drone and the attached sensor. It works seamlessly with both DJI payloads and custom hardware through the SDK.
Buy Details
Add to cart View details  
BulletProof PPE helmet ACH Gen.I, IIIA extended 0101.06
New
BulletProof PPE helmet ACH Gen.I, IIIA extended 0101.06
9314.9 Kč
Tax included
ACH Type Helmet, Gen.I Model: ACH Gen.I (Fast). Class IIIA corresponds to Polish K2/O3 and Ukrainian 3. This is currently the most popular helmet in the world, used by units such as the USMC. It is an "open" helmet featuring side rails for accessory mounting and a front mount. These helmets have undergone rigorous ballistic tests and are certified by both NIJ and the Ukrainian Certification Authority. All certificates are available in the "Certificates" section.
Buy Details
Add to cart View details  
BulletProof PPE helmet ACH Gen.II, IIIA extended
New
BulletProof PPE helmet ACH Gen.II, IIIA extended
13995.71 Kč
Tax included
Class IIIA corresponds to Polish K2/O3 and Ukrainian 3. This is a second-generation ACH-type helmet. Key features of the latest design, which distinguishes it from Generation I (Fast): The helmet shell has a new contour that better curves the trajectory of an incoming projectile, helping to reduce the kinetic energy of impact. The shell is shallower, making the helmet 150 grams lighter than Generation I. It is equipped with Wendy-style padding and additional cushions, offering improved impact absorption. 
Buy Details
Add to cart View details  
ZWO AM3 Harmonic Equatorial Mount + Carbon Tripod (79745)
New
ZWO AM3 Harmonic Equatorial Mount + Carbon Tripod (79745)
48736.99 Kč
Tax included
The ZWO AM3 is a highly portable harmonic equatorial mount designed for astrophotography. Weighing less than 4 kg, this mount can support telescopes up to 8 kg without the need for counterweights. With an additional counterweight and rod (not included), the capacity increases to 13 kg. Years of development and multiple patents have contributed to the advanced design of this mount. The AM3 can function in either equatorial or azimuth mode. Equatorial mode is ideal for astrophotography and requires precise alignment with the celestial pole.
Buy Details
Add to cart View details  
ZWO Camera ASI 585 MM Mono (85770)
New
ZWO Camera ASI 585 MM Mono (85770)
11559.4 Kč
Tax included
The ZWO ASI 585MM Mono camera features a large sensor with high sensitivity, excellent resolution, and a fast frame rate. This makes it ideal for planetary imaging, as well as for capturing detailed images of the Sun and Moon, and even for deep sky objects. Equipped with the modern Sony IMX585 sensor, the camera delivers high resolution with 2.9µm pixels, a high frame rate, and zero amplifier glow. This combination makes the camera suitable not just for planets, the Sun, and the Moon, but also for long-exposure deep sky photography. 
Buy Details
Add to cart View details  
ZWO Camera ASI 294 MM Mono (71020)
New
ZWO Camera ASI 294 MM Mono (71020)
32301.74 Kč
Tax included
The ASI 294MM is the first uncooled CMOS camera to feature the new Sony IMX492 sensor. This camera is ideal for imaging the Sun, Moon, and planets, as well as deep sky objects such as nebulae and galaxies. It uses Sony’s advanced back-illuminated sensor technology to deliver outstanding sensitivity. With 4.6 µm pixels, the ASI 294MM is a true all-rounder, offering excellent sensitivity even with very short exposure times. For even higher resolution, the camera can be used in "unlocked mode," reducing the pixel size to 2.3 µm.
Details
View details  
ZWO Camera ASI 2600 MM DUO Mono (83050)
New
ZWO Camera ASI 2600 MM DUO Mono (83050)
68646.2 Kč
Tax included
The ASI2600MM Duo Mono brings both imaging and guiding sensors together in a single, compact body. The primary sensor is the Sony IMX571, featuring a native 16-bit ADC, a dynamic range of 14 stops, and 3.76 micrometer square pixels. Readout noise is as low as 1.0 e, and the full well capacity reaches an impressive 80,000 e, all with no amplifier glow. The guiding sensor is the SC2210, offering excellent near-infrared sensitivity and matching the performance of the ZWO ASI 220MM mini camera. 
Details
View details  
ZWO Camera ASI 2600 MC-Air Color (84743)
New
ZWO Camera ASI 2600 MC-Air Color (84743)
56863.13 Kč
Tax included
The ASI 2600 MC-Air is an advanced astrophotography camera that combines both imaging and guiding sensors in a single compact unit. The main imaging sensor is the Sony IMX571, featuring a native 16-bit ADC, a dynamic range of 14 stops, and square pixels sized at 3.76 micrometers. Readout noise is as low as 1.0 e, and the full well capacity is an impressive 80,000 e—achieved with no amplifier glow. The built-in ASI Air astrophotography computer, previously sold separately, is now integrated. 
Buy Details
Add to cart View details  
ZWO Filter Holder with Filter Drawer 2" (77432)
New
ZWO Filter Holder with Filter Drawer 2" (77432)
2417.37 Kč
Tax included
The ZWO M54 filter holder is a highly advanced filter drawer designed with many useful features, making it an excellent alternative to bulky and heavy filter wheels. Astrophotographers who prefer a compact and lightweight setup will appreciate this filter drawer, which maintains both stability and accuracy despite its small size. This filter drawer is specifically developed for use with full-frame cameras such as the ASI6200MM and ASI6200MC Pro, but it is also compatible with other cameras featuring an M54x0.75 connection.
Buy Details
Add to cart View details  
ZWO Filters 1.25" Duo band (63984)
New
ZWO Filters 1.25" Duo band (63984)
2620.59 Kč
Tax included
The ZWO Duo-Band Filter is a dual narrowband filter designed especially for use with color ASI cameras. It is ideal for astronomers who already own a color camera and want to try narrowband imaging or capture emission nebulae, without needing to buy a monochrome camera, filter wheel, and multiple narrowband filters. This filter provides an affordable way to explore narrowband imaging and is also a practical solution for astrophotography in light-polluted urban environments.
Buy Details
Add to cart View details  
ZWO Filters LRGB filter 36mm unmounted (56438)
New
ZWO Filters LRGB filter 36mm unmounted (56438)
5871.09 Kč
Tax included
This filter set provides an affordable alternative to the more expensive filter sets offered by other manufacturers. Despite the lower price, these are high-quality, multi-coated interference filters. The set is specially optimized for use with ZW Optical’s ASI cameras. By combining exposures from the three color filters (red, green, blue) and the luminance filter (which also acts as an IR cut filter), you can create full-color images on your computer.
Details
View details  
ZWO Telescope FF65 AP 65/416 Quintuplet with AM3 and Carbon Tripods & Mounts (84333)
New
ZWO Telescope FF65 AP 65/416 Quintuplet with AM3 and Carbon Tripods & Mounts (84333)
74070.37 Kč
Tax included
The FF65 is a flatfield astrograph designed for astrophotography, featuring an aperture ratio of f/6.4 and a focal length of 416 mm. Unlike other ZWO FF apochromats that use a quadruplet design, the FF65 is built as a quintuplet with two ED (Extra-low Dispersion) lenses. This advanced optical design delivers excellent control over chromatic and other aberrations, making it a great choice for capturing sharp, color-accurate images.
Details
View details