New

Magus CHD20 Digital Camera (83192)

2273.63 zł

Tax included

The MAGUS CHD20 is a digital microscope camera designed for capturing photos, recording video, editing results, and performing linear and angular measurements of observed objects and their structures. Thanks to its built-in software, the camera can operate independently, connecting not only to a computer but also directly to an external display. This flexibility is enabled by two interfaces: HDMI and USB. The camera delivers a high-quality Full HD image with a resolution of 1920 × 1080 pixels, offering high frame rates and fast data transfer. 

Buy Details

Add to cart View details  

New

Ermenrich PRO LV70 Laser Level (85571)

710.3 zł

Tax included

Ermenrich PRO LV70 is a compact laser level designed to improve precision in construction, finishing, and renovation tasks. It projects 16 sharp green laser lines, making it suitable for laying tiles or laminate flooring, installing shelves, marking foundations, routing electrical wiring or pipes, and checking the alignment of brickwork or plaster. The device generates two horizontal and two vertical planes, each with a 360° projection, and offers a maximum working distance of up to 30 meters.

Buy Details

Add to cart View details  

New

Magus 60PL Plan 60х/0.80 ∞/0.17 Objective (85063)

979.75 zł

Tax included

This 60×/0.80 objective offers a resolution limit of 0.35 µm. Chromatic aberrations are corrected for blue and red wavelengths, spherical aberration is corrected for green, and field curvature is corrected across 90% of the field of view diameter, ensuring high image clarity and consistency. The objective is designed for infinity-corrected optical systems and features a parfocal distance of 45 mm. When paired with a 10×/20 mm eyepiece, it provides a 0.33 mm field of view diameter. It is optimized for specimens mounted with 0.17 mm cover slips, ensuring accurate focusing and image quality.

Buy Details

Add to cart View details  

New

Magus 2PL60 Plan 2х/0.06 ∞/- H60mm Objective (85065)

718.47 zł

Tax included

This 2×/0.06 objective provides a resolution limit of 4.58 µm. Chromatic aberrations are corrected for blue and red wavelengths, spherical aberration is corrected for green, and field curvature is corrected across 90% of the field of view diameter, ensuring uniform image quality across most of the visible area. When used with a 10×/22 mm eyepiece, the objective delivers a wide 11 mm field of view with a depth of field of 76 µm. This makes it ideal for initial scanning of specimens and for quickly locating areas of interest.

Buy Details

Add to cart View details  

New

Magus 20PL60 Plan 20х/0.40 ∞/0.17 H60mm Objective (85066)

938.93 zł

Tax included

This 20×/0.40 objective delivers a resolution limit of 0.69 µm. Chromatic aberrations are corrected for blue and red wavelengths, spherical aberration is corrected for green, and field curvature is corrected across 90% of the field of view diameter, ensuring sharp and uniform image quality. The objective is designed for infinity-corrected optical systems and features a parfocal distance of 60 mm. When combined with a 10×/22 mm eyepiece, it provides a 1.1 mm field of view diameter. The optical design is optimized for use with specimens mounted under 0.17 mm cover slips, allowing accurate focusing and consistent results.

Buy Details

Add to cart View details  

New

Magus 60PL60 Plan 60х/0.80 ∞/0.17 H60mm Objective (85068)

1428.8 zł

Tax included

This 60×/0.80 objective provides a resolution limit of 0.35 µm. Chromatic aberrations are corrected for blue and red wavelengths, spherical aberration is corrected for green, and field curvature is corrected across 90% of the field of view diameter, delivering sharp and evenly focused images. The objective is designed for infinity-corrected optical systems and features a parfocal distance of 60 mm. When used with a 10×/22 mm eyepiece, it produces a 0.36 mm field of view diameter. The optical design is optimized for specimens mounted with 0.17 mm cover slips, ensuring accurate focusing and reliable imaging results.

Buy Details

Add to cart View details  

New

Magus 100PL60 W Plan 100х/1.10 ∞/0.17 H60mm Objective (85069)

1265.54 zł

Tax included

This water immersion objective uses distilled water as the immersion medium. Distilled water has no inherent fluorescence and does not contaminate physiological solutions, making it especially suitable for biological research. Unlike oil immersion objectives, it requires no special cleaning procedures and eliminates additional costs associated with immersion oil or cleaning solvents. Oil immersion objectives deliver high resolution and contrast only when the specimen is in direct contact with the cover glass.

Buy Details

Add to cart View details  

New

Magus CMA100.260 C-mount Adapter (85080)

555.16 zł

Tax included

This C-mount adapter is designed for mounting a digital camera onto the trinocular tube of the MAGUS Bio 260T microscope. It ensures stable and accurate camera alignment for digital imaging applications.

Buy Details

Add to cart View details  

New

Magus SPD2 Polarizer/Analyzer Set (85081)

3429.17 zł

Tax included

This polarizer and analyzer set is designed to enable polarized light microscopy. The комплект includes a polarizer and an analyzer that work together to produce polarized illumination. The polarizer is installed on the collector, while the analyzer is positioned in the slot of the microscope stand above the revolving nosepiece. The polarizer can be rotated through 90 degrees, allowing precise control of the polarization angle. The intensity of transmitted light varies depending on the relative orientation of the polarizer and analyzer.

Buy Details

Add to cart View details  

New

Magus ND30 30х/8mm Eyepiece with diopter adjustment (D 30mm) (85086)

526.57 zł

Tax included

Eyepieces are used to extend the overall magnification range of a microscope. The 30× eyepiece provides the appropriate useful magnification when paired with a 2×/0.06 objective, allowing specimen details to be observed clearly. This eyepiece features diopter adjustment, making it an ideal choice for microscopes that do not have a diopter adjustment ring on the eyepiece tube. It allows users with imperfect eyesight to achieve sharp focus more easily.

Buy Details

Add to cart View details  

New

Magus ND10P 10х/22mm Eyepiece with pointer and diopter adjustment (D 30mm) (85088)

428.58 zł

Tax included

This eyepiece with an integrated pointer is designed for educational use and group demonstrations. The built-in pointer makes it easy to accurately draw attention to a specific structure or feature within the specimen, helping viewers follow explanations more clearly during teaching or collaborative research. The eyepiece is installed in place of a standard 10× eyepiece. In binocular or trinocular microscopes, a matching eyepiece without a pointer should be installed in the second eyepiece tube to ensure comfortable observation.

Buy Details

Add to cart View details  

New

Magus DF4 Darkfield Condenser NА 1.3-1.26 oil (85096)

1306.33 zł

Tax included

This darkfield condenser is designed to enable darkfield microscopy, a technique used to visualize unstained, translucent specimens that absorb little light and are often invisible under standard bright-field illumination. To use the darkfield condenser correctly, it must be paired with an objective whose numerical aperture is lower than that of the condenser. With a numerical aperture range of 1.26 to 1.30, the condenser is suitable for use with 20× and higher-magnification objectives.

Buy Details

Add to cart View details  

New

Magus DF3 Darkfield Condenser NА 0.7-0.9 (85097)

1085.86 zł

Tax included

This darkfield condenser is designed to enable darkfield microscopy, a technique used to observe unstained, translucent specimens that absorb very little light and are often invisible under conventional bright-field illumination. For proper operation, the numerical aperture of the condenser must be higher than that of the objective. With a numerical aperture range of 0.7 to 0.9, the condenser is suitable for use with dry objectives providing magnifications from 4× to 40× and numerical apertures below 0.9.

Buy Details

Add to cart View details  

New

Magus SPD3 Polarizer/Analyzer Set (85047)

3755.75 zł

Tax included

This polarizer and analyzer set is designed to enable polarized light microscopy. The set includes a polarizer and an analyzer that work together to create polarized illumination for advanced specimen observation. The polarizer is mounted on the collector, while the analyzer is installed in the slot of the microscope stand above the revolving nosepiece. The polarizer is fully rotatable through 360 degrees, allowing precise control of the polarization angle. The intensity of transmitted light varies depending on the relative orientation of the polarizer and analyzer.

Buy Details

Add to cart View details  

New

Magus DIC290 Attachment Set (85108)

17880.77 zł

Tax included

The differential interference contrast (DIC) device is designed for studying transparent, low-contrast specimens that are difficult or impossible to observe using standard bright-field microscopy. This technique enhances image resolution and clarity through optical methods rather than chemical staining, while also providing additional structural information about the specimen. The DIC method creates a pseudo-relief effect, giving the image an apparent three-dimensional appearance. 

Buy Details

Add to cart View details  

New

Magus Epi-FL05 LED Epi-Fluorescence Attachment, fluorescence filter cubes B/G/UV/R (85158)

21189.17 zł

Tax included

The epi-fluorescence attachment enables the use of the fluorescence technique, which relies on the ability of certain substances to emit light when excited by light of a specific wavelength. Some specimens display natural autofluorescence, while others require treatment with fluorochromes to produce a fluorescent signal. The attachment is installed in the optical path between the microscope stand and the head. Inside the unit is a five-position rotating turret containing four fluorescence filters with different wavelength ranges: broad-band blue (B), green (G), ultraviolet (UV), and narrow-band red (R).

Buy Details

Add to cart View details  

New

Magus 10PL60V Plan 10х/0.25 ∞/1.2 H60mm Objective (85120)

713.02 zł

Tax included

This objective is designed for brightfield microscopy. The MAGUS Bio V360 microscope kit includes phase objectives, which contain a metal film ring etched onto the inner lens. This ring is required for phase-contrast observations, as it introduces a quarter-wavelength phase shift relative to the remaining light and reduces overall light transmission. For this reason, objectives without phase plates are recommended for standard brightfield observations.

Buy Details

Add to cart View details  

New

Magus 20PL60V Plan 20х/0.40 ∞/1.2 H60mm Objective (85121)

814.92 zł

Tax included

This objective is intended for brightfield microscopy. The MAGUS Bio V360 microscope kit includes phase objectives, which feature a metal film ring etched onto the inner lens. This ring is necessary for phase-contrast observations, as it introduces a quarter-wavelength phase shift relative to the remaining light and reduces light transmission. For this reason, objectives without phase plates are recommended for standard brightfield work. A 20×/0.40 objective provides a resolution limit of 0.69 µm.

Buy Details

Add to cart View details  

New

Magus 40PL60V Plan 40х/0.60 ∞/1.2 H60mm Objective (85122)

1564.67 zł

Tax included

This objective is designed for brightfield microscopy. The MAGUS Bio V360 microscope kit includes phase objectives that incorporate a metal film ring etched onto the inner lens. This ring is required for phase-contrast observations, as it introduces a quarter-wavelength phase shift relative to the rest of the light and reduces light transmission. For this reason, objectives without phase plates are recommended for standard brightfield use. A 40×/0.60 objective provides a resolution limit of 0.45 µm.

Buy Details

Add to cart View details  

New

Magus SCH4 Bio V360 Labware Holder Set (85126)

1503.56 zł

Tax included

This professional holder set is designed to securely fix labware of various shapes when working with an inverted microscope. It ensures stable positioning of dishes and provides convenience during sample replacement. The set includes four holders intended for culture bottles and similar labware. Each holder features two seating sizes, allowing compatibility with two standard labware dimensions. The holders are installed directly into the microscope stage according to the shape and size of the accessory being used.

Buy Details

Add to cart View details  

New

Magus CEI A18 LED Episcopic Light with power supply and objective insert (85127)

8125.19 zł

Tax included

Episcopic illumination provides bright, uniform, and shadow-free lighting of the field of view without causing heat damage to the specimen. It is specifically used for illuminating opaque objects in stereomicroscopy. The attachment is installed between the microscope head and the zoom objective. The light source is housed in a dedicated lamphouse, which is connected to the attachment by a flexible dual light guide. Light is delivered through the guide into the attachment and then directed to the sample through the objective. 

Buy Details

Add to cart View details  

New

Magus CLI18T Cold Light with dual light guide (85128)

4274.47 zł

Tax included

The MAGUS CLI18T illuminator is designed to illuminate samples with oblique light, making it possible to clearly visualize surface relief, scratches, cracks, and other defects through pronounced highlights and shadows. The design of the illuminator prevents sample heating and eliminates the risk of thermal damage. The light source is housed in a dedicated lamphouse. Light is directed to the specimen through a flexible dual light guide. The position of the light guide can be adjusted to set the desired illumination angle, allowing precise control over light and shadow formation for detailed examination. 

Buy Details

Add to cart View details  

New

Magus LED RL18T Ring Light (85129)

998.3 zł

Tax included

This LED ring light with a matte diffuser is designed to provide bright, uniform, and shadow-free reflected illumination. It is mounted directly onto the CMO stereomicroscope objective, allowing the light to be delivered coaxially. This illumination method is particularly important when observing flat, glossy, or low-contrast samples. The matte diffuser effectively removes harsh shadows and significantly reduces glare, producing soft and evenly distributed light. The LEDs require no warm-up time, reaching the selected brightness instantly and maintaining a stable color temperature even during extended use.

Buy Details

Add to cart View details  

New

Magus 03A 0.3x Achromatic Main Objective (85134)

1140.92 zł

Tax included

To generate a three-dimensional image, a CMO stereomicroscope uses a common main objective positioned strictly perpendicular to the specimen plane. Light transmitted through or reflected from the sample enters this main objective and is then divided into two parallel optical paths. The stereoscopic angle is 11 degrees. The separated light beams are directed to the eyepieces or to a digital camera. Changing the main objective alters the microscope’s overall magnification, field of view, and working distance.

Buy Details

Add to cart View details