Astrozap Filters Sun filter for outside diameters from 308mm to 314mm (7619)
New
Astrozap Filters Sun filter for outside diameters from 308mm to 314mm (7619)
1579.63 AED
Tax included
These are safe, full aperture solar filters, sometimes called clear aperture filters. They are designed to allow the maximum amount of light into the telescope by making use of the full aperture. This provides the best possible daytime viewing, especially when atmospheric turbulence is minimal. If turbulence is present, a mask can be placed over the end of the filter to effectively reduce the aperture. This premium solar filter features an aluminum cell that is secured and centered on the end of the telescope tube with nylon thumb screws and felt padding.
Details
View details  
Baader Filters H-alpha/OIII/SII CMOS Narrowband 2" (70896)
New
Baader Filters H-alpha/OIII/SII CMOS Narrowband 2" (70896)
2260.94 AED
Tax included
H-alpha Filter: The H-alpha filter allows light with a wavelength of 656nm to pass through. It is considered the best option for narrowband H-alpha astrophotography when aiming for high-contrast images and revealing intricate nebula details, even in areas affected by strong light pollution. OIII Filter: The narrowband O-III 3nm filter is specifically designed for observing nebulae. It allows a narrow 3nm bandwidth of light centered at a wavelength of 500nm, which matches the OIII emission lines, while blocking all other wavelengths. SII Filter: The narrowband S-II 7nm filter transmits light at a wavelength of 672nm with a 3nm bandpass, making it ideal for nebula photography.
Buy Details
Add to cart View details  
Baader 90°, T2 star diagonal with 35mm of free aperture (10576)
New
Baader 90°, T2 star diagonal with 35mm of free aperture (10576)
833.67 AED
Tax included
This prism star diagonal uses optics from Carl ZEISS Jena and features a multi-coated, solid metal housing. It is equipped with a T2 thread on both sides, resulting in an extremely compact design that can be adapted to any telescope system. The housing is of significantly higher quality, and the prism is larger compared to standard plastic prism diagonals. The flatness and precision of the prism angles are approximately five times better than those found in standard models.
Buy Details
Add to cart View details  
Baader Guide scope rings BP IV 175-265mm (85667)
New
Baader Guide scope rings BP IV 175-265mm (85667)
2230.05 AED
Tax included
If you want to install a guide telescope in parallel to your main telescope, guide rings are the simplest and most cost-effective solution. The Guide Rings PLUS 115mm provide high build quality and all the essential features for this purpose, allowing you to mount guide telescopes such as 80mm diameter refractors. The guide scope is held securely in place, will not slip, and is protected from scratches. There are four additional milled flat surfaces with photo thread holes on the outer edge of the rings, making it easy to attach extra accessories or connect multiple rings together.
Buy Details
Add to cart View details  
Baader Tripod Double tube photo stand "astro &amp, Nature" - with carrying bag (10175)
New
Baader Tripod Double tube photo stand "astro &amp, Nature" - with carrying bag (10175)
806.23 AED
Tax included
This tripod is specially designed for astronomical observation, offering a highly torsion-resistant structure and a central column that can be extended by 35 cm. It is ideal for standing observation with binoculars or spotting scopes, and features a maximum height of 189 cm. The tripod comes with a fluid pan-tilt head equipped with handles for stable, two-handed positioning of binoculars. The twin strut legs have telescopic sections for added stability. The pan-tilt head is removable, allowing the tripod to be used as a solid tangential mount with a 1/4" photo thread.
Buy Details
Add to cart View details  
Baader Heavy-duty dual mounting plate up to 150kg (85767)
New
Baader Heavy-duty dual mounting plate up to 150kg (85767)
4288.57 AED
Tax included
This solid 8-inch double mounting plate has a length of 750 mm and is specifically designed for the parallel installation of two large telescopes, supporting a load capacity of up to 150 kg. It is ideal for main instruments ranging from 20 to 24 inches (such as the PlaneWave DeltaRho 500) used together with an additional telescope. The extended length of the plate provides flexible balancing and ample space for extra accessories.
Buy Details
Add to cart View details  
Baader OMS-Nano Remote Switch for 10Micron Mounts (85640)
New
Baader OMS-Nano Remote Switch for 10Micron Mounts (85640)
960.61 AED
Tax included
This external OMS-Nano (Observation Management System) switch module allows any 10Micron GM or AZ mount to be switched on and off remotely. The module connects to the same LAN network as the mount. Once installed, it can be accessed through its assigned IP address using any web browser. The OMS-Nano comes preconfigured for direct use with 10Micron mounts, and all necessary cables are included.
Buy Details
Add to cart View details  
Berlebach Tripod Planet Celestron NexStar Evolution (85554)
New
Berlebach Tripod Planet Celestron NexStar Evolution (85554)
3098.06 AED
Tax included
This stable wooden tripod features large cross-sections and innovative clamping elements, providing a high load capacity and outstanding stability with excellent shock absorption. The new, extremely flat tripod head with a 105 mm wide leg connection delivers maximum torsional rigidity. The modified wood profile increases the load capacity to 120 kilograms compared to the previous version.
Buy Details
Add to cart View details  
Berlebach Tripod Planet Skywatcher CQ350 (85671)
New
Berlebach Tripod Planet Skywatcher CQ350 (85671)
2892.23 AED
Tax included
This stable wooden tripod features large cross-sections and innovative clamping elements, delivering a high load capacity and excellent stability with outstanding shock absorption. The new, extremely flat tripod head with a 105 mm wide tripod leg connection provides maximum torsional rigidity. The updated wood profile increases the load capacity to 120 kilograms compared to the previous version. Double clamp collars on the tripod leg extension are available upon request for an additional charge.
Buy Details
Add to cart View details  
Berlebach Tripod UNI 18 iOptron CEM26/GEM28/HAE29/HEM27 (85992)
New
Berlebach Tripod UNI 18 iOptron CEM26/GEM28/HAE29/HEM27 (85992)
2247.2 AED
Tax included
The Astro tripods of the UNI series are known for their excellent price-performance ratio. As with all wooden tripods, they provide very effective damping of high-frequency vibrations, which are often transmitted by steel or aluminum tripods. This quality makes wooden tripods especially attractive for demanding astronomers and astrophotographers. The tripod legs have an infinitely adjustable spread angle. The attachable shelf, measuring 37 cm, allows a spread angle of approximately 23 degrees.
Buy Details
Add to cart View details  
Berlebach Tripod Sky 10Micron GM 2000 HPS (85759)
New
Berlebach Tripod Sky 10Micron GM 2000 HPS (85759)
9119.24 AED
Tax included
This tripod is a world first from a company with the longest tradition in tripod manufacturing. It is specially designed for highly demanding and ambitious astronomers. The Berlebach SKY tripod combines the excellent qualities of wood with the advanced benefits of modern carbon materials. The ultra-flat tripod head features 105 mm wide leg joints for maximum torsional stiffness. The carbon-fibre feet are produced with a new manufacturing process, contributing to the tripod’s high load capacity and light weight.
Buy Details
Add to cart View details  
Berlebach Wooden tripod Report 422 3/8" (85672)
New
Berlebach Wooden tripod Report 422 3/8" (85672)
1344.88 AED
Tax included
The Modular Report Tripod System features a lightweight magnesium mounting head that serves as the base for ten different inserts. The module insert can be changed at any time with the included special wrench. The conical fixation system provides a secure, clearance-free connection between components. With the new stop system, the tripod legs can be set at angles of approximately 20°, 40°, 60°, 80°, and 100° using a wing catch. This design ensures that the specified load capacity of the tripod is maintained even at maximum leg inclination.
Buy Details
Add to cart View details  
Berlebach Wooden tripod Report 723 3/8" (85760)
New
Berlebach Wooden tripod Report 723 3/8" (85760)
1046.41 AED
Tax included
The Modular Report Tripod System features a lightweight magnesium mounting head that serves as the base for ten different inserts. The module insert can be changed at any time using the special wrench included with the changing module. The conical fixation system ensures a secure, clearance-free connection of the components. The new stop system allows the tripod legs to be set at angles of approximately 20°, 40°, 60°, 80°, and 100° using a wing catch. This design ensures the tripod can support its specified load even at the maximum leg inclination.
Buy Details
Add to cart View details  
Berlebach Wooden tripod Report 823 3/8" (85811)
New
Berlebach Wooden tripod Report 823 3/8" (85811)
1125.31 AED
Tax included
The Modular Report Tripod System features a lightweight magnesium mounting head that serves as the base for ten different inserts. The module insert can be changed at any time using the special wrench provided. The conical fixation system ensures a secure, clearance-free connection between components. With the new stop system, the tripod legs can be set at angles of approximately 20°, 40°, 60°, 80°, and 100° using a wing catch. This design ensures that the tripod maintains its specified load capacity even at maximum leg spread.
Buy Details
Add to cart View details  
Sky-Watcher Equatorial wedge for Fusion 120i (SW-4246)
New
Sky-Watcher Equatorial wedge for Fusion 120i (SW-4246)
641.24 AED
Tax included
The Sky-Watcher Equatorial Wedge for the Fusion 120i is a robust accessory that converts the alt-azimuth mount of the telescope into an equatorial mount, making it possible to perform long-exposure astrophotography. By setting the wedge angle to match the geographical latitude of your observing location, you can track celestial objects along a single axis (right ascension), which greatly simplifies taking long-exposure images.
Buy Details
Add to cart View details  
Berlebach Wooden tripod Report Astro 412 3/8" (58307)
New
Berlebach Wooden tripod Report Astro 412 3/8" (58307)
1588.48 AED
Tax included
Stability and vibration damping are crucial requirements for any tripod. The Berlebach REPORT tripod system is designed to meet the highest standards, delivering quality and reliability for demanding users in observation, photography, video, astronomy, film, and geodesy applications. Berlebach tripods are known for their high-quality materials, excellent craftsmanship, and award-winning design. The Report 412 tripod comes with module insert 1, which is suitable for mounting heavy instruments. These instruments are placed on top and secured from below using a star knob.
Buy Details
Add to cart View details  
Berlebach 3-way-panheads 3D-Super 3/8 (85555)
New
Berlebach 3-way-panheads 3D-Super 3/8 (85555)
1197.37 AED
Tax included
High-precision tripod head for three-dimensional pan and tilt operation. Swivel arm can be controlled from the front or rear, suitable for both right- and left-handed users. Each adjustment axis—horizontal, vertical, diagonal—can be released and locked individually. Camera support plate: 105 x 80 mm. Camera mount thread: 1/4", or 3/8" optional. Base thread: 3/8". Load capacity: 12 kg
Buy Details
Add to cart View details