Astronomik Filters HSO 12nm 31mm (85950)
Astronomik Filters HSO 12nm 31mm (85950)
708.02 BGN
Tax included
H-alpha Filter: This filter is designed for photographing hydrogen nebulae, whether you are in areas with artificial light pollution or under dark skies. It significantly enhances the contrast between H-alpha emitting objects and the background sky. Thanks to its narrow 12 nm half-width and almost 100% transmission at the H-alpha line, this filter provides much greater contrast than broadband filters. The 12 nm half-width is specifically optimized for use with typical CCD and CMOS sensors.
Buy Details
Add to cart View details  
Astronomik Filters HSO 12nm 36mm (85951)
Astronomik Filters HSO 12nm 36mm (85951)
804.8 BGN
Tax included
H-alpha Filter: This filter is ideal for photographing hydrogen nebulae, whether you are in areas with strong artificial light pollution or under dark skies. It greatly enhances the contrast between objects that emit H-alpha light and the background sky. With its narrow 12 nm half-width and nearly 100% transmission at the H-alpha wavelength, this filter achieves significantly higher contrast than broadband filters. The 12 nm half-width is perfectly suited for typical CCD and CMOS sensors.
Buy Details
Add to cart View details  
Astronomik Filters HSO 12nm 50mm (85952)
Astronomik Filters HSO 12nm 50mm (85952)
1288.64 BGN
Tax included
H-alpha Filter: This filter is ideal for photographing hydrogen nebulae from both light-polluted areas and dark sky locations. It greatly enhances the contrast between objects glowing in H-alpha light and the sky background. With a narrow 12 nm half-width and nearly 100% transmission at the H-alpha wavelength, this filter offers significantly greater contrast than broadband filters. The 12 nm half-width is optimized for use with typical CCD and CMOS sensors.
Buy Details
Add to cart View details  
Astronomik Filters HSO 6nm 1.25" (85953)
Astronomik Filters HSO 6nm 1.25" (85953)
804.8 BGN
Tax included
H-alpha Filter: This filter is designed for photographing hydrogen nebulae from both light-polluted areas and dark sky locations. It greatly increases the contrast between objects that emit H-alpha light and the background sky. SII Filter: The SII filter is suitable for imaging sulfur emission regions, whether you are in areas with strong light pollution or under dark skies. It enhances the contrast between objects glowing in the sulfur line at 672 nm and the sky background.
Buy Details
Add to cart View details  
Astronomik Filters HSO 6nm 2" (85954)
Astronomik Filters HSO 6nm 2" (85954)
1869.25 BGN
Tax included
H-alpha Filter: This filter is ideal for photographing hydrogen nebulae, whether you are working in light-polluted areas or under dark skies. It significantly enhances the contrast between objects that emit H-alpha light and the background sky. SII Filter: The SII filter is suitable for imaging sulfur emission regions from both light-polluted locations and dark-sky sites. It greatly increases the contrast between objects glowing in the sulfur line at 672 nm and the sky background.
Buy Details
Add to cart View details  
Astronomik Filters HSO 6nm 31mm (85955)
Astronomik Filters HSO 6nm 31mm (85955)
966.08 BGN
Tax included
H-alpha Filter: This filter is perfect for photographing hydrogen nebulae, whether you are in light-polluted areas or under dark skies. It greatly enhances the contrast between objects that emit H-alpha light and the background sky. SII Filter: The SII filter is designed for imaging sulfur emission regions, both from light-polluted locations and dark-sky sites. It dramatically increases the contrast between objects glowing in the sulfur line at 672 nm and the sky background.
Buy Details
Add to cart View details  
Astronomik Filters HSO 6nm 36mm (85956)
Astronomik Filters HSO 6nm 36mm (85956)
1208 BGN
Tax included
H-alpha Filter: This filter is ideal for photographing hydrogen nebulae, whether you are working in light-polluted areas or under dark skies. It significantly enhances the contrast between objects that emit H-alpha light and the background sky. SII Filter: The SII filter is designed for capturing sulfur emission regions, suitable for both light-polluted locations and dark-sky sites. It dramatically increases the contrast between objects glowing in the sulfur line at 672 nm and the sky background.
Buy Details
Add to cart View details  
Astronomik Filters HSO 6nm 50mm (85957)
Astronomik Filters HSO 6nm 50mm (85957)
1869.25 BGN
Tax included
H-alpha Filter: This filter is designed for photographing hydrogen nebulae in both light-polluted environments and dark-sky locations. It greatly enhances the contrast between objects that emit H-alpha light and the surrounding sky background. SII Filter: The SII filter is ideal for capturing sulfur emission regions, whether you are shooting from light-polluted areas or dark skies. It significantly increases the contrast between objects glowing in the sulfur line at 672 nm and the sky background.
Buy Details
Add to cart View details  
Astronomik Filters CLS CCD XT Clip Sony alpha 7 (85677)
Astronomik Filters CLS CCD XT Clip Sony alpha 7 (85677)
451.78 BGN
Tax included
Astronomik XT filters enable you to capture sharp, beautiful star images right into the corners of the frame, even with extremely wide-angle lenses. With other Astronomik filters, image quality in the corners can be limited at short focal lengths. Although these filters use a glass plate only one millimetre thick, this thickness can cause aberrations with certain wide-angle lenses, stretching stars into lines. Astronomik XT filters are built on an ultra-thin substrate, just 0.3 millimetres thick. This thinness minimizes “star streaks” in the corners. 
Buy Details
Add to cart View details  
Astronomik Filters H-alpha 12nm MaxFR XT Clip EOS R XL (85741)
Astronomik Filters H-alpha 12nm MaxFR XT Clip EOS R XL (85741)
791.84 BGN
Tax included
The clip filters can be quickly and easily mounted inside the camera body without the need for any tools. You can insert or remove the filter at any time, even while on the go or at night. No modifications to the camera body are required. Removal is performed with a small hook, which is included in the package. These filters are compatible with Canon EOS R, EOS R3, EOS R5, EOS R6, EOS R6 MKII, EOS RP, EOS Ra, EOS R8, as well as APS-C models like R7, R10, R50, and R100.
Buy Details
Add to cart View details  
Astrozap Filters Sun filter for outside diameters from 308mm to 314mm (7619)
Astrozap Filters Sun filter for outside diameters from 308mm to 314mm (7619)
743.26 BGN
Tax included
These are safe, full aperture solar filters, sometimes called clear aperture filters. They are designed to allow the maximum amount of light into the telescope by making use of the full aperture. This provides the best possible daytime viewing, especially when atmospheric turbulence is minimal. If turbulence is present, a mask can be placed over the end of the filter to effectively reduce the aperture. This premium solar filter features an aluminum cell that is secured and centered on the end of the telescope tube with nylon thumb screws and felt padding.
Details
View details  
Baader Filters H-alpha/OIII/SII CMOS Narrowband 2" (70896)
Baader Filters H-alpha/OIII/SII CMOS Narrowband 2" (70896)
1063.83 BGN
Tax included
H-alpha Filter: The H-alpha filter allows light with a wavelength of 656nm to pass through. It is considered the best option for narrowband H-alpha astrophotography when aiming for high-contrast images and revealing intricate nebula details, even in areas affected by strong light pollution. OIII Filter: The narrowband O-III 3nm filter is specifically designed for observing nebulae. It allows a narrow 3nm bandwidth of light centered at a wavelength of 500nm, which matches the OIII emission lines, while blocking all other wavelengths. SII Filter: The narrowband S-II 7nm filter transmits light at a wavelength of 672nm with a 3nm bandpass, making it ideal for nebula photography.
Buy Details
Add to cart View details  
Baader 90°, T2 star diagonal with 35mm of free aperture (10576)
Baader 90°, T2 star diagonal with 35mm of free aperture (10576)
392.26 BGN
Tax included
This prism star diagonal uses optics from Carl ZEISS Jena and features a multi-coated, solid metal housing. It is equipped with a T2 thread on both sides, resulting in an extremely compact design that can be adapted to any telescope system. The housing is of significantly higher quality, and the prism is larger compared to standard plastic prism diagonals. The flatness and precision of the prism angles are approximately five times better than those found in standard models.
Buy Details
Add to cart View details  
Baader Guide scope rings BP IV 175-265mm (85667)
Baader Guide scope rings BP IV 175-265mm (85667)
1049.3 BGN
Tax included
If you want to install a guide telescope in parallel to your main telescope, guide rings are the simplest and most cost-effective solution. The Guide Rings PLUS 115mm provide high build quality and all the essential features for this purpose, allowing you to mount guide telescopes such as 80mm diameter refractors. The guide scope is held securely in place, will not slip, and is protected from scratches. There are four additional milled flat surfaces with photo thread holes on the outer edge of the rings, making it easy to attach extra accessories or connect multiple rings together.
Buy Details
Add to cart View details  
Baader Tripod Double tube photo stand "astro &amp, Nature" - with carrying bag (10175)
Baader Tripod Double tube photo stand "astro &amp, Nature" - with carrying bag (10175)
379.35 BGN
Tax included
This tripod is specially designed for astronomical observation, offering a highly torsion-resistant structure and a central column that can be extended by 35 cm. It is ideal for standing observation with binoculars or spotting scopes, and features a maximum height of 189 cm. The tripod comes with a fluid pan-tilt head equipped with handles for stable, two-handed positioning of binoculars. The twin strut legs have telescopic sections for added stability. The pan-tilt head is removable, allowing the tripod to be used as a solid tangential mount with a 1/4" photo thread.
Buy Details
Add to cart View details  
Baader Heavy-duty dual mounting plate up to 150kg (85767)
Baader Heavy-duty dual mounting plate up to 150kg (85767)
2017.88 BGN
Tax included
This solid 8-inch double mounting plate has a length of 750 mm and is specifically designed for the parallel installation of two large telescopes, supporting a load capacity of up to 150 kg. It is ideal for main instruments ranging from 20 to 24 inches (such as the PlaneWave DeltaRho 500) used together with an additional telescope. The extended length of the plate provides flexible balancing and ample space for extra accessories.
Buy Details
Add to cart View details  
Baader OMS-Nano Remote Switch for 10Micron Mounts (85640)
Baader OMS-Nano Remote Switch for 10Micron Mounts (85640)
451.99 BGN
Tax included
This external OMS-Nano (Observation Management System) switch module allows any 10Micron GM or AZ mount to be switched on and off remotely. The module connects to the same LAN network as the mount. Once installed, it can be accessed through its assigned IP address using any web browser. The OMS-Nano comes preconfigured for direct use with 10Micron mounts, and all necessary cables are included.
Buy Details
Add to cart View details  
Berlebach Tripod Planet Celestron NexStar Evolution (85554)
Berlebach Tripod Planet Celestron NexStar Evolution (85554)
1457.72 BGN
Tax included
This stable wooden tripod features large cross-sections and innovative clamping elements, providing a high load capacity and outstanding stability with excellent shock absorption. The new, extremely flat tripod head with a 105 mm wide leg connection delivers maximum torsional rigidity. The modified wood profile increases the load capacity to 120 kilograms compared to the previous version.
Buy Details
Add to cart View details