Magus SPH2 Phase Сontrast Device (85152)
385630.5 ¥
Tax included
The MAGUS SPH2 phase contrast system includes a set of phase contrast sliders, a set of phase contrast objectives, and a centering telescope. This system is designed for the observation of transparent, low-contrast specimens that are difficult or impossible to see using brightfield illumination. Because staining procedures can damage or kill living cells, phase contrast offers a key advantage by allowing the study of living, unstained organisms in their natural state. The technique is widely used in medicine, ecology, pharmacology, agriculture, and related fields.
Magus Epi-FL04M LED Epi-Fluorescence Attachment, fluorescence filter cubes B/G/UV (85153)
991395.2 ¥
Tax included
The epi-fluorescence attachment is designed to enable fluorescence microscopy. This technique relies on the ability of certain substances to emit light when excited by illumination at a specific wavelength. Some specimens naturally exhibit autofluorescence, while others require treatment with fluorochromes to produce a fluorescent signal. The attachment is installed in the optical path between the microscope head and the stand. Inside the unit is a four-position rotating turret that holds three broadband fluorescence filter sets for blue (B), green (G), and ultraviolet (UV) excitation.
Magus FL S-APO60 PlanF S-Apo 4х/10х/20х/40х/100х oil ∞/0.17 H60mm Objective Set (85154)
642718.46 ¥
Tax included
The plan semi-apochromatic fluorescent objective is designed for both transmitted-light and fluorescence microscopy. The objective lenses are manufactured from fluorite, a highly transparent mineral that performs consistently across a wide wavelength range. Fluorite does not exhibit autofluorescence or birefringence and provides correction of the secondary spectrum. A high numerical aperture increases resolving power, producing images in the eyepieces and through a digital camera that are brighter, cleaner, and higher in contrast than those obtained with standard plan achromatic objectives.
Magus Epi-FL04 LED Epi-Fluorescence Attachment, fluorescence filter cubes FITC/TRITC/DAPI (85156)
1166534.92 ¥
Tax included
The epi-fluorescence attachment is designed for fluorescence microscopy. This technique is based on the ability of certain substances to emit light when excited by illumination at a specific wavelength. Some specimens show natural autofluorescence, while others require staining with fluorochromes to produce a fluorescent signal. The attachment is installed in the optical path between the microscope head and the stand. Inside the unit is a four-position rotating turret equipped with three narrow-band fluorescence filter sets for the fluorochromes DAPI, FITC, and TRITC. 
Magus Epi-FL06 Epi-Fluorescence Attachment, mercury lamp, fluorescence filter cubes В/G/UV/V/R/FITC/TRITC/DAPI (85157)
1436477.42 ¥
Tax included
The epi-fluorescence attachment is designed for fluorescence microscopy. This technique is based on the ability of certain substances to emit light when excited by illumination at a specific wavelength. Some specimens naturally exhibit autofluorescence, while others require treatment with fluorochromes to produce a visible fluorescent signal. The attachment is installed in the optical path between the microscope head and the stand. Inside the unit is a six-position rotating turret fitted with fluorescence filters.
Magus SPH360 Phase Contrast Device, with set of Plan S-Apo Ph 4х/10х/20х/40х/60х H60mm objectives (85160)
1624471.68 ¥
Tax included
The MAGUS SPH360 phase contrast system includes a set of phase contrast sliders and phase contrast objectives. It is designed for observing transparent, low-contrast specimens that are difficult or impossible to see using brightfield illumination. Because staining procedures can damage or kill living cells, phase contrast microscopy allows living, unstained organisms to be examined in their natural condition. This technique is widely used in medicine, ecology, pharmacology, agriculture, and related fields.
Levenhuk MED D30T LCD Digital Trinocular Microscope (73999)
309467.74 ¥
Tax included
The Levenhuk MED D30T LCD is a trinocular biological microscope equipped with a digital camera featuring a built-in LCD screen. It allows full control of image and video settings directly on the camera display, without the need to connect the microscope to a computer. Image capture, video recording, parameter adjustment, and data review can all be performed directly on the screen. The microscope is built with infinity-corrected semi-plan achromatic optics and supports Köhler illumination, making it a professional instrument suitable for a wide range of laboratory applications.
Levenhuk MED 25B Binocular Microscope (73992)
172568.24 ¥
Tax included
The Levenhuk MED 25B microscope is a binocular laboratory instrument equipped with two condensers: one for brightfield and one for darkfield observation. Both condensers support oil immersion techniques. This microscope is designed for professional use in medicine, microbiology, biochemistry, and other scientific disciplines, and is suitable for research, diagnostic work, and educational purposes. It provides magnification up to 1000x, supports Köhler illumination, and enables detailed study of complex microstructures.
Levenhuk 400M Monocular Microscope (75419)
26992.68 ¥
Tax included
The Levenhuk 400M Monocular Microscope is designed for laboratory research on biological samples. It produces sharp, high-contrast images and supports observations at magnifications ranging from 40x to 400x. The microscope is suitable for use in medical, educational, and research environments. It features built-in LED illumination that can operate either on batteries or via an AC power supply. The optical system combines a wide-field eyepiece with achromatic objectives of different magnifications.
Magus Lum VD500L Fluorescence Inverted Digital Microscope (83022)
1687137.39 ¥
Tax included
The MAGUS Lum V500L is an inverted microscope designed for fluorescence microscopy in reflected light as well as brightfield and phase-contrast microscopy in transmitted light. For fluorescence observation, it uses DAPI, FITC, and TRITC fluorochrome filters. The inverted configuration makes it possible to study samples directly in laboratory vessels such as Petri dishes and flasks. Standard lab ware up to 55 mm in height can be used, or up to 165 mm when the stand is tilted. The optical system is optimized for lab ware with a bottom thickness of 1.2 mm. 
Magus Metal V700 DIC Metallurgical Inverted Microscope (83714)
1606797.58 ¥
Tax included
This microscope is designed for examining the microstructure of metals, alloys, semiconductor materials, and other opaque specimens. Its inverted construction places no limits on the size of the sample, with only the weight restricted to a maximum of 2 kg. Before observation, the specimen must be properly prepared and then placed on the stage with the surface facing downward. The microscope supports three reflected-light contrast techniques: brightfield, simple polarization, and differential interference contrast (DIC).
Magus Lum V500L Fluorescence Inverted Microscope (82909)
1430049.44 ¥
Tax included
The MAGUS Lum V500L is an inverted microscope designed for fluorescence microscopy in reflected light and for brightfield and phase-contrast microscopy in transmitted light. Fluorescence observation is performed using filter sets for the DAPI, FITC, and TRITC fluorochromes. The inverted design allows specimens to be examined directly in common laboratory vessels such as Petri dishes and flasks. The maximum vessel height is 55 mm in the standard position, or up to 165 mm when the stand is tilted. The optical system is optimized for lab ware with a bottom thickness of 1.2 mm.
Magus Lum V500 Fluorescence Inverted Microscope (82908)
1340883.31 ¥
Tax included
The MAGUS Lum V500 Fluorescent Inverted Microscope is engineered for observing samples placed in laboratory vessels up to 55 mm high with a bottom thickness of up to 1.2 mm. When the illuminator stand is tilted, the system can also accommodate larger laboratory ware up to 165 mm in height. The microscope supports observation in reflected light using fluorescence techniques, as well as transmitted light for brightfield and phase-contrast microscopy. It is designed for use in fields such as medicine, pharmacology, biochemistry, epidemiology, and related laboratory disciplines.
Magus Bio 290T Biological Microscope (83482)
1286219.67 ¥
Tax included
This is a research-grade microscope designed for observing transparent and translucent biological samples such as smears and cross-sections in transmitted light using the brightfield method. With the installation of optional accessories, the microscope also supports darkfield, phase contrast, differential interference contrast (DIC), fluorescence, and polarization techniques. The motorized revolving nosepiece and motorized condenser automate objective changes and illumination adjustments.
Magus Metal 650 BD Metallurgical Microscope (82901)
1221908.33 ¥
Tax included
The MAGUS Metal 650 BD Metallurgical Microscope is designed for examining the surfaces of photomasks, integrated circuits, printed circuit boards, and other large, elongated samples. It features an extra-large stage that supports oversized specimens and a highly precise fine-focus system with a 0.7 µm scale value, enabling accurate work at high magnifications. The microscope supports brightfield, darkfield, and polarized light observation methods, making it a practical choice for quality control laboratories, research facilities, and university departments.
Magus Metal V700 BD Metallurgical Inverted Microscope (82903)
1093285.65 ¥
Tax included
The MAGUS Metal V700 BD is an inverted metallurgical microscope in which the revolving nosepiece is positioned beneath the specimen and observation is performed using reflected light. It supports brightfield, darkfield, and polarized light microscopy. The microscope is designed for examining metals, alloys, semiconductors, and other opaque materials, including large and heavy specimens weighing up to 2 kg. It is widely used in industrial production, manufacturing plants, quality control laboratories, universities, and research centers.
Magus Metal 630 BD Metallurgical Microscope (82899)
964664.4 ¥
Tax included
The MAGUS Metal 630 BD Metallurgical Microscope is designed for brightfield, darkfield, and polarization microscopy using reflected light. A powerful 50 W halogen illumination system delivers high-quality images with any objective and across all supported microscopy techniques. The microscope is intended for quality control, microstructure analysis of metals and semiconductors, and the study of opaque specimens. It is widely used in industrial production environments, research laboratories, and university departments.
Magus Metal 600 BD Metallurgical Microscope (82897)
884275.94 ¥
Tax included
The MAGUS Metal 600 BD Metallurgical Microscope is designed for examining specimens in reflected light using brightfield, darkfield, and polarization microscopy. It is intended for the analysis of metal and semiconductor materials, as well as other flat, polished, and highly reflective samples. When operating in transmitted light, the microscope can also be used to study translucent specimens, such as thin films or particles captured on filters. This model is well suited for metallurgical and mechanical engineering applications, quality control and engineering laboratories, and technical universities.
Magus Bio V360 Biological Inverted Microscope (83483)
884275.94 ¥
Tax included
This research-grade inverted microscope is designed for the study of liquid precipitates, cell colonies, living cells, tissue cultures, and other stained or unstained specimens placed in laboratory glassware. Its inverted optical layout allows the use of Petri dishes, multi-well plates, vials, roller bottles, and flasks up to 75 mm high with a bottom thickness of 1.2 mm, using objectives specifically designed for this type of glassware. When the condenser is removed, the microscope enables observation of cell cultures in Petri dishes or cylindrical flasks up to 187 mm high.
Magus Pol D850 LCD Polarizing Digital Microscope (83043)
726713.01 ¥
Tax included
The MAGUS Pol 850 Polarizing Microscope is designed for operation in both transmitted and reflected light. It supports polarization and brightfield observation methods and is intended for studying anisotropic specimens in biology, geology, and polymer science, as well as opaque polished sections up to 15 mm thick with one polished surface. This microscope is well suited for professional work in medicine, forensics, mineralogy, crystallography, and petrography. The MAGUS CHD40 is a digital HDMI camera with three video interfaces and automatic switching between 4K and Full HD based on the connected monitor’s resolution.
Magus Pol D850 Polarizing Digital Microscope (83042)
697772.76 ¥
Tax included
The MAGUS Pol 850 Polarizing Microscope is designed for work in both transmitted and reflected light. It supports polarization and brightfield observation methods and is intended for studying anisotropic specimens in biology, geology, and polymer research, as well as opaque polished sections up to 15 mm thick with one polished surface. It is a practical tool for specialists in medicine, forensics, mineralogy, crystallography, and petrography. The MAGUS CBF70 is a professional scientific camera designed for microscope use with 4×, 10×, 20×, and 40× objectives.
Magus Bio DH260 Biological Digital Microscope (83480)
450175.1 ¥
Tax included
The MAGUS Bio DH260 is an everyday microscope designed in its standard configuration for examining biological samples in transmitted light using the brightfield method. With optional components, it can also support fluorescence or polarized light, as well as darkfield and phase contrast techniques. The microscope features a binocular head with a built-in camera, a coded revolving nosepiece that maintains user-selected illumination levels when magnification changes, and an LCD screen that displays key operating parameters.
Magus Bio DH260 Biological Digital Microscope (83481)
418019.43 ¥
Tax included
This is a research-grade microscope designed for observing transparent and translucent biological specimens—including smears and cross-sections—in transmitted light using the brightfield method. By adding optional accessories, the microscope can also support darkfield, phase contrast, fluorescence, and polarization techniques. A key feature is the coded revolving nosepiece, which keeps brightness comfortable when switching objectives. Intelligent lighting control improves workflow speed and user comfort by reducing the need for constant manual adjustments, allowing the researcher to stay focused on the task.
Magus Metal 630 Metallurgical Microscope (82898)
414804 ¥
Tax included
The MAGUS Metal 630 metallurgical reflected-light microscope is designed for examining the microstructure of opaque specimens of any height and size. Typical objects of study include metals, alloys, semiconductors, and paint coatings. The microscope supports brightfield and polarized light techniques. Its compact design is a major advantage, making it well suited for laboratories with limited workspace or storage capacity. The MAGUS Metal 630 is an effective solution for industrial applications, research laboratories, and university departments.